Maytag mwf4100aws owner manual Winter Storage, Other Safety Precautions

Page 5

The MAYTAG Whole Home Water Filtration System must be kept wet at all times after installation. Failure to do so may cause System to dry and become damaged, which may lead to personal injury, and/or physical damage and will void any warranty.

Winter Storage

The MAYTAG Whole Home Water Filtration System will be damaged if frozen. The System must be winterized according to the Winterization Procedure by a MAYTAG Services Qualified Service Technician.

The MAYTAG Whole Home Water Filtration System must be winterized prior to temperatures falling below 0°C (32 F). Failure to do so may cause System to dry, freeze and become damaged, which may lead to personal injury, and/or physical damage and will void any warranty.

Other Safety Precautions

Do not plug in the Controller transformer if there is water on electrical wiring or the power supply.

Always shut off water flow and release water pressure before cleaning or maintaining the System.

The System is intended for indoor use only. The power supply and controller must not be exposed to weather elements.

A MAYTAG Services Qualified Service Technician must perform an Integrity Test at least once a year.

The MAYTAG Whole Home Water Filtration System must be;

tested annually using the integrity test.

operated with either a Carbon or Stainless Steel Prefilter.

Failure to do so may cause System to become damaged, which may lead to personal injury, and/or physical damage and will void any warranty.

Emergency Bypass Safety (if installed where required by local plumbing codes)

Some Systems will have a bypass valve installed. If a bypass valve is installed, your System piping will look like Photo 1. Follow these safety precautions if your System has been installed with an emergency bypass valve.

MAYTAG Whole Home Water Filtration System Owners Manual MA1-5

November 2003

5

Image 5
Contents Table of Contents Important see safety warnings and cautions insideDealer and System Information Thank you…Safety Instructions Using this Manual …Service and Maintenance Safety Operational SafetyWinter Storage Other Safety PrecautionsPhoto Models MWF4200AWS and MWF4300AWS Certifications and TestingModel MWF4100AWS Legal Disclaimer ServiceTrademarks System Description Replacement PartsSanitizing Your Household Distribution System Maintenance ScheduleStartup of a new Maytag Whole Home Water Filtration System 4200 4100Model 4300 Required service Comments Every 6 mo Every 12 MoMWF4300AWS Drain the System for 1 minute Shut off waterRemove the cap and internal prefilter from the System CleaningStainless Steel PrefilterSoak 60 min Model Cleaning Chemical UsedRe-install Internal Fill and Flush for 30 min Replacing the External Sediment Prefilter CartridgeStopcock Page Base Controller Models MWF4100AWS and MWF4200AWS Setting the ControllerBase Controller Choosing a Controller ProgramAdvanced Controller Model MWF4300AWS Advanced Controller Winterization ProcedureNovember Drain line components for all models System Before Winter Freeze-up Inlet line components for MWF4300AWSNovember Spring startup and cleansing Prefilter November Frequently Asked Questions Annual Maintenance ChecklistCleaning the Stainless Steel Casing Does the System require electricity? Possible causes of low water pressure Problem SolutionDoes the System affect the water pressure? What can be done to increase my water pressure?How long does the automatic cleaning cycle take? What happens if the power goes out?What are the maintenance requirements? How much water is used for flushing?What happens if there is a boil water alert in my area? How long does the Carbon Prefilter last?Can it be shut down in winter? November Section Problem/Situation Correction/Action System TroubleshootingSection Problem/Situation Correction/Action System 41/6 34/9Pro-rated cost to the homeowner as a % Maytag Whole Home Water Filtration System Limited WarrantyFiltration System Warranty Schedule Suggested List November November