PREMIER SX USER MANUAL, MAINTENANCE GUIDE & LOG BOOK
Certificate of COMMISSIONING for the Premier SX Fire Alarm System installed at:
Address:
I/we being the competent person(s) responsible (as indicated by my/our signatures below) for the commissioning of the fire alarm system, particulars of which are set out below, CERTIFY that the said work for which I/we have been responsible complies to the best of my/our knowledge and belief with the recommendations of Clause 39 of
Name (in block letters): | Position: |
Signature: | Date: |
For and on behalf of: |
|
Address: |
|
Postcode:
The extent of liability of the signatory is limited to the system described below.
Extent of the installation work covered by this certificate.
Variations from the recommendations of clause 39 of BS
All equipment operates correctly
Installation work is, as far as can be reasonably ascertained, of an acceptable standard
The entire system has been inspected and tested in accordance with the recommendations of 39.2.c of BS
The system performs as required by the specifications prepared by:
Taking into account the guidance contained in section 3 of BS
The documentation described in Clause 40 of BS
The following work should be completed before/after (delete as applicable) the system becomes operational
The following potential causes of false alarms should be considered at the time of the next service visit:
Before the system becomes operational, it should be soak tested in accordance with the recommendations
of Clause 35.2.6 of BS
Approved Document No: | PAGE 21 | |
Issue: 1.3 Authorised: GH | Date: 9/6/2004 |
|