Johnson Controls CSV060B-240B installation instructions 410A Quick Reference Guide

Page 27

FORM 145.15-IOM7 (412)

R-410A QUICK REFERENCE GUIDE

Refer to Installation Instructions for specific installation requirements.

•R-410A Refrigerant operates at 50 - 70 percent higher pressures than R-22. Be sure that servicing equipment and replacement components are designed to operate with R-410A.

•R-410A Refrigerant cylinders are rose colored.

•Recovery cylinder service pressure rating must be 400 psig. DOT 4BA400 or DOT BW400.

•Recovery equipment must be rated for R-410A.

•Do not use R-410A service equipment on R-22 systems. All hoses, gages, recovery cylinders, charging cylinders and recovery equipment must be dedicated for use on R-410A systems only.

•Manifold sets must be at least 700 psig high side, and 180 psig low side, with 550 psig retard.

•All hoses must have a service pressure rating of 800 psig.

•Leak detectors, must be designed to detect HFC refrigerants.

•Systems must be charged with refrigerant. Use a commercial type metering device in the manifold hose.

•R-410A can only be used with POE type oils.

•POE type oils rapidly absorb moisture from the atmosphere.

•Vacuum pumps will not remove moisture from POE type oils.

•Do not use liquid line driers with a rated working pressure rating less than 600 psig.

•Do not install suction line driers in the liquid line.

•A liquid line drier is required on every unit.

•Do not use an R-22 TXV. If a TXV is to be used, it must be an R-410A TXV.

•Never open system to atmosphere when under vacuum.

•If system must be opened for service, evacuate system then break the vacuum with dry nitrogen and replace filter driers.

JOHNSON CONTROLS

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model CSV Vertical R-410A Read Before Proceeding Changeability of this Document General Information CSV Operating Weight Unit Shipping Weight LbsWater Piping Unit MountingCSV060 Dimensional Data CSV096-120 Dimensional Data CSV180 Dimensional Data CSV240 Dimensional Data Evaporator Blower Discharge Conversion DuctworkElectrical Wiring Typical Wiring Schematic Johnson Controls Johnson Controls Johnson Controls Electrical Data Electrical Data Standard Evaporator Motor Model #Electrical Data Oversized Evaporator Motor FAN Performance CSV060B CSV096BCSV120B CSV240B CSV180BEVAPORATOR-STANDARD Blower Motor and Drive Data Motor and Pulley DataBlower Speed Adjustment Pressure Drop FT H20 Unit Flow Rate GPM Water Pressure Drop DataDrop Unit Flow Rate GPMUnit START-UP and OperationContinuous Blower Safety SwitchesMicroprocessor Controller OperationSafety Controls Condensate Overflow SwitchFlash Codes Drive Belt Evaporator CoilRefrigerant Circuits Blower410A Quick Reference Guide Form 145.15-IOM7

CSV060B-240B specifications

The Johnson Controls CSV060B-240B is a cutting-edge packaged rooftop air conditioning unit designed for commercial applications, renowned for its energy efficiency, reliability, and advanced technological features. This model exemplifies the balance between performance and sustainability, making it a prime choice for businesses seeking effective climate control solutions.

One notable feature of the CSV060B-240B is its variable speed compressor technology. This innovative design allows the unit to adjust its cooling output in response to real-time demand, which significantly enhances energy efficiency. By operating at lower speeds during moderate cooling loads, the system consumes less energy while maintaining consistent indoor comfort. This not only reduces operational costs but also minimizes the environmental impact associated with energy consumption.

In addition to its variable speed compressor, the CSV060B-240B is equipped with advanced intelligent controls. These controls enable users to integrate the unit into building management systems, allowing for seamless monitoring and adjustments. Features such as remote connectivity and smartphone integration provide added convenience, allowing facility managers to optimize system performance from anywhere.

Another key characteristic of the CSV060B-240B is its robust construction designed for durability and easy maintenance. The unit comes with a weatherproof cabinet, which protects internal components from harsh environmental conditions. This design extends the lifespan of the unit and reduces downtime due to maintenance or repairs. Additionally, the access panels are strategically placed to facilitate easy servicing, making it user-friendly for maintenance personnel.

The CSV060B-240B also emphasizes quiet operation, making it ideal for environments where noise levels need to be kept in check, such as hospitals, schools, and offices. Enhanced sound insulation and the use of a quiet fan design contribute to a more pleasant indoor atmosphere.

Overall, the Johnson Controls CSV060B-240B stands out in the market due to its combination of energy efficiency, smart technology, durability, and quiet operation. It is an excellent investment for businesses aiming to enhance their HVAC systems while adhering to sustainability practices and ensuring the comfort of their occupants. The CSV060B-240B not only meets the demands of modern commercial spaces but also sets a new standard for HVAC performance and innovation.
Top Page Image Contents