Johnson Controls 341426-BIM-A-0108 Unit Dimensions Front, Unit Minimum CLEARANCES1

341426-BIM-A-0108				BLOWERSERVICEVENTAIROUTLETHOOD
				ACCSSCOMPARTMENT
GASSUPPLY1-1/4"DIA.				PANEL
HLE(1/2"NPTI
CNNECTION)O
UNITCONDENSATE
CONNECTIN3/4"NPTI
(TRAPRECMMENDED)O
HIGHVOLTAGE		B	3-3/4
CONNKNOCKOUT.1-3/8"DIA.
HIGHVOLTAGE	2-1/2
CONN.7/8"DIA.
KNOCKOUT
GASSUPPLY1-1/4"DA.
KNOCKOUT(1/2"NPTI
CONNECTION)					1-1/2	5-3/8
LOWVOLTAGECONN.
1-3DIA.KNOCKOUT				47-1/4
X7/8"HOLE
				(OVERALL)	3-1/3	2-5/8

CONDENSERCOIL

2-3/8REFRIGERATA N

CONNECTIOS

COMBUSTIOAIR

INLETLOUVERSFRONT

GAS/LECRICCONTROE T L

11SRVICEACCESS

12-3/4(OVERALL)49-1/8COMPARMENTPANEL

All dimensions are in inches. They are subject to change with- out notice. Certified dimensions will be provided upon request.

FIGURE 7 - UNIT DIMENSIONS - FRONT

TABLE 9: UNIT DIMENSIONS FRONT

UNIT SIZE		DIMENSION
	“A”		“B”
036 and 042	33-1/2		18-1/4
048 and 060	41-1/2		23-1/8

TABLE 10: UNIT MINIMUM CLEARANCES1 2

CLEARANCES

FRONT	36”
BACK	0”
LEFT SIDE (Filter-Access)	24”
RIGHT SIDE	12”
BELOW UNIT3	0”
ABOVE UNIT 4	36” (For Condenser Air Discharge

1.A 1” clearance must be provided between any combustible material and the supply 7 air ductwork.

2.The products of combustion must not be allowed to accumulate within a confined space and recirculate.

3.Units may be installed on combustible floors made from wood or class A, B, or C roof covering material.

4.Units must be installed outdoors. Overhanging structures or shrubs should not obstruct condenser air discharge outlet.

Johnson Controls Unitary Products 11