Optima Company 1001 installation instructions General Description, Related Documents

Page 3

1001

General Description

The Ferroli 1001 is a wall mounted, room sealed, fan assisted, combination boiler for Central Heating (C.H.) and domestic Hot Water (D.H.W.).

The boiler is of light weight construction and the heat exchanger provides Central Heating and Domestic Hot Water from an integrally designed unit. The boiler contains its own expansion vessel for sealed systems. The wall mounting jig contains all the isolating cocks for the water and gas supplies which can be fitted to the wall and provided with all the necessary gas and water connections prior to the boiler being attached. The flue can either be left hand, right hand or rear. There are three flue lengths available and they are 0.75 metres (for wall thickness up to 565 mm), 2 metres (for wall thickness up to 1815 mm) and 3 metres (for wall thickness) up to 2815 mm these wall thicknesses assume a rear flue outlet. For side outlet the effective wall thickness for each flue length is reduced by 91 mm plus the distance of the appliance from the side wall. The Central Heating and the Domestic Hot Water temperature is controlled by the Honeywell Modureg valve in conjunction with the P.C.B. The boiler is fitted with its own Central Heating pump. The pump is switched ON/OFF by the time clock and/or a 24 Volt room thermostat. The pump circuit also has a 6 minute over-run time. There is a Domestic Hot Water flow switch fitted and when there is a demand for Domestic Hot Water (flow of more than 0.5 gallon/minute, 2.5 litre/minute) the Central Heating pump is switched off making available the maximum output of the gas burner for Domestic Hot Water. On the P.C.B. the output for Central Heating can be set. However, this is not required for the majority of installations as the boiler will automatically adjust its output to the system demand-AUTO-MISER control. This does not influence the maximum output for domestic hot water. At the factory the central heating output is pre-set to maximum. The appliance is not suitable for external installation.

Related Documents

This appliance must be installed strictly in accordance with these instructions:

The Gas Safety Regulations (Installations & Use) 1994.

The Local Building Regulations.

The Building Regulations.

The Buildings Standards (Scotland - Consolidated) Regulations.

British Standards Codes of Practice:

B.S. 7593

1993 TREATMENT OF WATER IN DOMESTIC HOT WATER CENTRAL HEATING

SYSTEMS

 

 

B.S. 5546

1990 INSTALLATION OF HOT WATER SUPPLIES FOR DOMESTIC PURPOSES

B.S.

5440

PART 1 FLUES

B.S.

5440

PART 2 AIR SUPPLY

B.S. 5449

1990 FORCED CIRCULATION HOT WATER SYSTEMS

B.S. 6798

1987 INSTALLATION OF GAS FIRED HOT WATER BOILERS

B.S.

6891

1989

GAS INSTALLTIONS

B.S.

7671

1992

IEE WIRING REGULATIONS

B.S.

4841

1990

SPECIFICATION FOR EXPANSION VESSALS

Model Water Bye Laws.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Help Telephone 08707 282 InstallerService Engineer Serial No Phone numbersIndex 1001Related Documents General DescriptionNatural GAS G20 Propane LPG G31 Technical dataKey Appliance DimensionsBoiler Flow Diagram 1001 Position Installation DetailsTerminal Position Minimum Clearance mm Make up Water Flue systemGas Supply Water System Central HeatingKey Pump performance curve Grundfos UPS Built-in Central Heating Water Circulating PumpUnpacking Installation= 22 mm 5 = 15 mm Drilling templateSide Flue Outlet fig Preparing the Flue AssemblyRear Flue Outlet fig Used laterConnecting the Boiler Fixing points Lift here Fixing screws With Sufficient Clearance To Insert Assembly From Inside With insufficient Clearance To Insert Assembly From InsideProcedure Filling the Domestic Hot Water System Commissioning and TestingGas Installation Filling the Central Heating SystemTo Light the Boiler fig Procedure Burner Pressure C.H. and D.H.WBurner Pressure C.H. and D.H.W Coil Burner pressure VS C.H. Load with L.P.G. G31 Propane Burner Perssure C.HD.H.W. Burner Pressure System OperationHanding Over to the User Time Clock Display. SymbolReset Button Reset is only possible with switch a in set Clock positionOver ride 100 136 101 Spare Parts ListH.W. Pressure Drop VS. flow H.W Temperature VS. flow =Cold Water 15 C =Cold Water 5 CConnector RY not energised Jumpers JP1 JP4Temp Ohm SensorSpecial Air Intake/Flue Outlet Phone numbers Installer Service Engineer

1001 specifications

Optima Company 1001 stands at the forefront of innovation, showcasing a remarkable blend of advanced technology and user-centric design. Founded with the vision of revolutionizing the industry, Optima has quickly positioned itself as a leader in producing high-performance solutions that cater to a diverse clientele.

One of the main features of Optima Company 1001 is its commitment to sustainability. The company has integrated eco-friendly practices into its manufacturing processes, allowing for reduced waste and lower energy consumption. This not only benefits the environment but also enhances the overall efficiency of its products. By utilizing recyclable materials and implementing sustainable sourcing practices, Optima ensures that it remains at the cutting edge of corporate responsibility.

Another hallmark of Optima Company 1001 is its dedication to technological advancement. The firm employs state-of-the-art technologies that resonate with the demands of modern consumers. This includes the use of artificial intelligence and machine learning to optimize operational efficiency and personalize user experiences. Through data analytics, Optima is able to anticipate trends and adapt its offerings, ensuring that customers always receive the most relevant solutions.

Durability and reliability are pivotal characteristics of products manufactured by Optima Company 1001. Each product undergoes rigorous testing to meet high standards of quality and performance. This commitment to excellence means that customers can trust in the longevity and functionality of the products they purchase, giving them peace of mind in their investment.

User-friendliness is also a defining trait of Optima’s offerings. The company places great emphasis on design, ensuring that products are intuitive and accessible to users. This focus on usability is reflected in straightforward interfaces and ergonomic designs that enhance the overall user experience.

Furthermore, Optima Company 1001 prioritizes customer service, providing comprehensive support throughout the product lifecycle. This includes installation assistance, maintenance services, and a robust warranty program, underscoring the company’s dedication to customer satisfaction.

In summary, Optima Company 1001 is characterized by its innovative technologies, commitment to sustainability, product reliability, user-centric design, and exemplary customer service. These features collectively enhance its reputation as an industry leader and pioneer in delivering solutions that are not only high-quality but also aligned with the needs and values of today’s consumers.
Top Page Image Contents