GE 5200 Air Filters, Operating Tip, Keeping these filters clean will, To clean the air filters

Air Filters

Operating Tip:

To maintain optimum performance, clean the filters at least every 30 days.

FRONT

Dirty filter—Needs cleaning

FRONT

Clogged filter—Greatly reduces cooling, heating and airflow.

Turn the Zoneline off before cleaning.

The most important thing you can do to maintain the Zoneline is to clean the filter at least every 30 days. Clogged filters reduce cooling, heating and air flow.

Keeping these filters clean will:

•Decrease cost of operation.

•Save energy.

•Prevent clogged heat exchanger coils.

•Reduce the risk of premature component failure.

To clean the air filters:

•Vacuum off the heavy soil.

•Run water through the filters.

•Dry thoroughly before replacing.

To remove the air filters:

2 air filters

Pull up

To replace the air filters:

Push down

CAUTION:

DO NOT operate the Zoneline without the filters in place. If a filter becomes torn or damaged it should be replaced immediately.

Operating without the filters in place or with damaged filters will allow dirt and dust to reach the in- door coil and reduce the cooling, heating, airflow and efficiency of the unit.

Replacement filters are available from your salesperson, GE dealer, GE Service and Parts Center

or authorized Customer Care® servicers.

9