GE AG_14, MG_24 installation instructions USE of Extension Cords -115-Volt models only

Page 3

www.GEAppliances.com

WARNING!

USE OF EXTENSION CORDS –115-Volt models only

Safety Instructions

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 14 gauge, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 125 volts.

CAUTION:

DO NOT use an extension cord with any of the 230/208 volt models.

Operating

USE OF ADAPTER PLUGS –115-Volt models only

Instructions

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the air conditioner until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Installation Instructions

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

3

Troubleshooting Tips Consumer Support

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Write the model and serial numbers here Air ConditionersSafety Precautions USE of Extension Cords -115-Volt models only Controls Remote ControlAir Direction Up and Down Cool ModeFAN Mode Vent ControlFor Normal Cooling-SelectHIGH Cool or MED Mode ControlsTemp Controls Cooling DescriptionsAir Direction Side-to-Side Instructions Operating Vent ControlAir Filter Care and cleaning of the air conditionerGrille and Case Outdoor CoilsRead these instructions completely and carefully Preparing to install the air conditionerParts Included Window Installation InstructionsStorm Window Requirements Window RequirementsRemove the Air Conditioner From the Case Prepare the Window and the CasePrepare the Window Install the Case in the WindowInstall the Air Conditioner in the Case Before you call for service… Normal Operating Sounds We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration For The Period Air Conditioner WarrantyGE Will Replace What GE Will Not CoverReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

AG_14, MG_24 specifications

The GE AG_14 and MG_24 are two advanced electric power generation systems developed by General Electric (GE) that showcase the innovative approaches the company is known for in the energy sector. These systems are engineered to meet the demands of modern energy requirements, leveraging cutting-edge technologies and features to enhance performance and efficiency.

The GE AG_14 is a gas turbine power generation system designed for high efficiency and low emissions. It is built to operate on a wide range of fuels, including natural gas and biofuels, making it versatile for various energy applications. One of the standout features of the AG_14 is its advanced combustion technology, which minimizes nitrogen oxide (NOx) emissions while optimizing fuel consumption. Additionally, the AG_14 incorporates advanced materials and design principles to improve durability and maintenance intervals, reducing overall lifecycle costs.

The system is equipped with integrated digital controls that allow for real-time monitoring and precise management of operations. This helps optimize performance and improve reliability, ensuring that the energy output is consistent and meets grid requirements. The modular design of the AG_14 allows for easy transportation and installation, making it suitable for both temporary and permanent setups.

On the other hand, the GE MG_24 is a multi-generational distributed power solution aimed at providing reliable energy in remote or off-grid locations. Its hybrid capability enables it to function alongside renewable energy sources like solar and wind, effectively contributing to a greener energy mix. The MG_24 features energy storage integration, allowing for smooth operation during periods of fluctuating energy demand and supply.

The MG_24 system is designed with robust telemetry and internet of things (IoT) capabilities, enabling operators to manage the unit efficiently from a distance through a centralized control platform. This enhances operational visibility and aids in predictive maintenance, which helps minimize downtime.

Characteristics of both the AG_14 and MG_24 systems highlight GE's commitment to sustainability, efficiency, and adaptability in today's energy landscape. With these innovative solutions, GE continues to play a pivotal role in shaping the future of power generation, addressing the challenges of energy transition while promoting economic growth and environmental stewardship.
Top Page Image Contents