GE MG_24 Care and cleaning of the air conditioner, Grille and Case, Outdoor Coils, Air Filter

Page 8

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Care and cleaning of the air conditioner.

Grille and Case

Turn the air conditioner off and remove the plug

To clean, use water and a mild detergent. Do not

from the wall outlet before cleaning.

use bleach or abrasives.

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your GE service outlet.

Air Filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

To remove:

 

Open the inlet grille upward by pulling out the

1

bottom of the inlet grille.

 

 

Using the tab, pull up slightly on the filter to

2

release it and pull it down.

 

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Air Conditioners Write the model and serial numbers hereSafety Precautions USE of Extension Cords -115-Volt models only Remote Control ControlsCool Mode FAN ModeVent Control Air Direction Up and DownMode Controls Temp ControlsCooling Descriptions For Normal Cooling-SelectHIGH Cool or MEDInstructions Operating Vent Control Air Direction Side-to-SideCare and cleaning of the air conditioner Grille and CaseOutdoor Coils Air FilterPreparing to install the air conditioner Read these instructions completely and carefullyWindow Installation Instructions Parts IncludedWindow Requirements Storm Window RequirementsPrepare the Window and the Case Remove the Air Conditioner From the CaseInstall the Case in the Window Prepare the WindowInstall the Air Conditioner in the Case Before you call for service… Normal Operating Sounds We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Air Conditioner Warranty GE Will ReplaceWhat GE Will Not Cover For The PeriodSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

AG_14, MG_24 specifications

The GE AG_14 and MG_24 are two advanced electric power generation systems developed by General Electric (GE) that showcase the innovative approaches the company is known for in the energy sector. These systems are engineered to meet the demands of modern energy requirements, leveraging cutting-edge technologies and features to enhance performance and efficiency.

The GE AG_14 is a gas turbine power generation system designed for high efficiency and low emissions. It is built to operate on a wide range of fuels, including natural gas and biofuels, making it versatile for various energy applications. One of the standout features of the AG_14 is its advanced combustion technology, which minimizes nitrogen oxide (NOx) emissions while optimizing fuel consumption. Additionally, the AG_14 incorporates advanced materials and design principles to improve durability and maintenance intervals, reducing overall lifecycle costs.

The system is equipped with integrated digital controls that allow for real-time monitoring and precise management of operations. This helps optimize performance and improve reliability, ensuring that the energy output is consistent and meets grid requirements. The modular design of the AG_14 allows for easy transportation and installation, making it suitable for both temporary and permanent setups.

On the other hand, the GE MG_24 is a multi-generational distributed power solution aimed at providing reliable energy in remote or off-grid locations. Its hybrid capability enables it to function alongside renewable energy sources like solar and wind, effectively contributing to a greener energy mix. The MG_24 features energy storage integration, allowing for smooth operation during periods of fluctuating energy demand and supply.

The MG_24 system is designed with robust telemetry and internet of things (IoT) capabilities, enabling operators to manage the unit efficiently from a distance through a centralized control platform. This enhances operational visibility and aids in predictive maintenance, which helps minimize downtime.

Characteristics of both the AG_14 and MG_24 systems highlight GE's commitment to sustainability, efficiency, and adaptability in today's energy landscape. With these innovative solutions, GE continues to play a pivotal role in shaping the future of power generation, addressing the challenges of energy transition while promoting economic growth and environmental stewardship.
Top Page Image Contents