Airing Your Room
If the atmosphere in your room is stale, you can air the room using the Fan feature.
1 If necessary, press the 
(On/Off) button.
Result: ◆ The POWER indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit was last used.
◆ The indoor unit beeps.
2If the 
is not displayed at the top of the remote control,
press the MODE button on the remote control one or more times until it appears.
Result: | ◆ The indoor unit beeps each time you press the MODE button. |
| ◆ The air conditioner runs in FAN mode. |
| ◆ The temperature is set automatically. |
Note | You can change modes at any time. |
3 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed:
Low
Medium
High
Result: Each time you press the FAN button, the indoor unit beeps.
4To control the direction of the air flow, refer to page 15.