GE APE08 installation instructions Install Window Slider in Window, Wood PIECE- Width 1″

Installation Instructions

Instructions for installing the window slider in a double-hung window. If you have a sliding window, see instructions on pages 12 and 13.

6INSTALL WINDOW SLIDER IN WINDOW

ATo allow the window to close properly around the adjustable window slider, for inclined window sill, attach a piece of wood to the sill at the back of the window stool. NOTE: For a flat sill, no wood is needed.

WOOD PIECE– WIDTH: 1″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the sill behind the window stool to make it the same height as the stool.

Attach securely with nails or screws provided by the installer.

Wood (same height as stool)

Stool

Sill

Inside

BCut the window sash seal (adhesive- backed) to the window width and stick the adhesive side to the bottom of the sash.

Cut the window stool seal (non-adhesive backed) to the window width and place on the window stool.

Window sash seal

Window stool seal

Inside

CIf the window slider is shorter than the width of the window, pull the sliding arm out to the width of the window.

If the window slider is longer than the width of the window, cut the slider arm to the width of the window.

If the two-piece window slider is too short for the width of the window, attach and use the third piece of the slider.

Third piece of slider for extra wide windows

Window stool

Inside

DAttach the slider to the stool through

one of its holes using a large wood screw.

Large wood screw

Window stool

Inside

EPull the window down against the top of the window slider.

Window slider brackets

FHook the two window slider brackets over the bottom edge of the window slider and attach to the window stool using two large wood screws.

10