GE APE08 Do not use an adapter plug with this appliance, Important Safety Information

Page 2

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

When using this portable air conditioner, always follow basic safety precautions, including the following:

Use this appliance only for its intended purpose as described in this Owner’s Manual.

This portable air conditioner must be properly installed as described in this manual before it is used.

Never unplug your portable air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

Turn the portable air conditioner OFF and unplug it before cleaning.

GE does not support any servicing of the air conditioner. We strongly recommend that you do not attempt to service the air conditioner yourself.

For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

Use a 15 amp time delay fuse or circuit breaker.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first touching the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified

2service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

Image 2
Contents 49-7563 11-06 JR Write the model and serial numbers here Model # Serial #Important Safety Information Do not use an adapter plug with this applianceUSE of Extension Cords Ge.comAbout the controls on the air conditioner SafetyTips Care and Cleaning Tips Consumer SupportUsing the Drain Hose Using the portable air conditionerUsing the Water Bucket How to Insert the Batteries in the Remote ControlCare and cleaning of the air conditioner Troubleshooting Tips Consumer SupportParts Included Tools YOU will NeedParts YOU will Need Attach Exhaust Adapter to Window Slider Inside Opening Install Water Bucket CoverChoose a Location Install Window Slider in Window Wood PIECE- Width 1″Install TOP Window Gasket and Window Locking Bracket Attach Exhaust HoseInstall Window Locking Bracket Attach Exhaust Hose to Window Slider Attach Exhaust Hose to Window SliderTroubleshooting Tips… Problem Possible Causes What To DoOrder to Make a Warranty Claim GE Air Conditioner Warranty-One Year Limited WarrantySafety Instructions Operating Instructions What Is Not CoveredReal Life Design Studio Parts and AccessoriesConsumer Support GE Appliances Website Contact UsAcondicionador de aire Seguridad Guarde Estas Instrucciones Acerca de los controles del acondicionador de aire SeguridadLimpieza Solución de ClienteCómo usar la Cubeta de agua Cómo usar el acondicionador de aireAyuda al cliente Solución Cómo usar la Manguera de DrenajeOperación De problemas Ayuda al clienteCuidado y limpieza del acondicionador de aire Partes Incluidas Herramientas QUE NecesitaráPartes QUE Usted Necesitará Deslizador DE LA Ventana Selección DEL Lugar AdecuadoLA Apertura Interna DEL Instale EL Deslizador DE Ventana EN LA Ventana Pedazo DE MADERA- Anchura 1″Pegue LA Manguera DE Escape Instale LA Abrazadera DE Cierre DE LA Ventana DE Escape AL Deslizador DE Ventana Pegue LA Manguera DE Escape AL Deslizador DE VentanaPegue LA Manguera Solucionar problemas Problema Causas posibles Qué hacerPara hacer un reclamo de garantía Seguridad OperaciónNosotros reemplazaremos Lo que no está cubiertoPiezas y accesorios Ayuda al cliente Página Web de GE AppliancesEstudio de diseño para la vida real Póngase en contacto con nosotros

APE08 specifications

The GE APE08 is a premier room air conditioner renowned for its efficiency and user-friendly features, making it an ideal choice for cooling individual rooms during hot summer months. With a cooling capacity of 8,000 BTUs, this portable unit is designed to cool spaces up to approximately 350 square feet, making it suitable for bedrooms, home offices, or living areas.

One of the standout features of the APE08 is its energy efficiency. It comes with an Energy Efficiency Ratio (EER) that meets or exceeds Energy Star standards, enabling users to enjoy a comfortable environment without incurring high electricity bills. This efficient operation is complemented by the unit’s eco-friendly refrigerant that minimizes environmental impact.

The GE APE08 is equipped with advanced features for optimal comfort and convenience. The unit includes multiple cooling and fan speeds, allowing users to customize airflow based on their needs. A programmable thermostat provides precise temperature control, letting users set their desired room temperature and maintain it consistently. Additionally, the 24-hour timer enables users to schedule operation, so the unit can cool the room before they arrive home.

Installation is made simple with the included installation kit, which allows for both single and double-hung windows. The unit is lightweight and portable, fitted with caster wheels, making it easy to move from room to room as needed.

Noise levels are also a consideration with the APE08, which operates quietly, allowing for restful sleep and undisturbed activities. Its sleek design and modern aesthetic make it a stylish addition to any room decor.

In summary, the GE APE08 is more than just a cooling unit; it combines advanced technology, energy efficiency, and user-centric features, ensuring it meets the needs of today’s consumers. Whether battling the summer heat or seeking additional comfort during warm evenings, the GE APE08 is a reliable choice that delivers performance and convenience without compromising on style.