GE APE08 installation instructions Tips, Consumer Support

Page 5

ge.com

When the air conditioner is turned on, it will automatically start in the default setting.

Safety Instructions

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

■The remote control signal has a range of up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly—see the Using the portable air conditioner section.

Operating

FAN Mode

Use the FAN at HIGH, MID or LOW to provide air circulation and filtering without cooling. Since fan only settings do not provide cooling, a temperature setting will not be displayed.

Instructions

COOL Mode

Use the COOL mode with HIGH, MID or LOW fan

for cooling. Use the Temp INCREASE ▲ /DECREASE ▼ pads to set the desired temperature between 61°F and 86°F in 1°F increments.

A thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler. Set the thermostat at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling—Select the COOL mode and HIGH or MID fan with a middle set temperature.

For Maximum Cooling—Select the COOL mode and HIGH fan with a lower set temperature.

For Quieter & Nighttime Cooling—Select the COOL mode and LOW fan with a middle set temperature.

NOTE: If you switch from a COOL setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a COOL setting.

Care and Cleaning Troubleshooting

DRY Mode

Use the DRY mode to provide dehumidification only. The fan will run at a low fixed speed at this setting. Keep windows and doors closed for the best dehumidifying effects. When using the DRY mode, detach the exhaust hose from the unit and remove the window slider or seal the opening in the window exhaust adapter.

NOTES:

If you switch from a DRY setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a DRY setting.

The compressor runs in this mode.

Tips

AUTO Mode

Set to AUTO for the temperature and fan speed to

NOTE: DRY will also appear in the display when using

automatically provide optimum comfort settings.

the AUTO mode.

5

Consumer Support

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Write the model and serial numbers here Model # Serial # 49-7563 11-06 JRDo not use an adapter plug with this appliance Important Safety InformationGe.com USE of Extension CordsAbout the controls on the air conditioner SafetyTips Care and Cleaning Consumer Support TipsUsing the Water Bucket Using the portable air conditionerUsing the Drain Hose How to Insert the Batteries in the Remote ControlTroubleshooting Tips Consumer Support Care and cleaning of the air conditionerParts Included Tools YOU will NeedParts YOU will Need Attach Exhaust Adapter to Window Slider Inside Opening Install Water Bucket CoverChoose a Location Wood PIECE- Width 1″ Install Window Slider in WindowAttach Exhaust Hose Install TOP Window Gasket and Window Locking BracketInstall Window Locking Bracket Attach Exhaust Hose to Window Slider Attach Exhaust Hose to Window SliderProblem Possible Causes What To Do Troubleshooting Tips…Safety Instructions Operating Instructions GE Air Conditioner Warranty-One Year Limited WarrantyOrder to Make a Warranty Claim What Is Not CoveredConsumer Support GE Appliances Website Parts and AccessoriesReal Life Design Studio Contact UsAcondicionador de aire Seguridad Guarde Estas Instrucciones Seguridad Acerca de los controles del acondicionador de aireCliente Limpieza Solución deAyuda al cliente Solución Cómo usar el acondicionador de aireCómo usar la Cubeta de agua Cómo usar la Manguera de DrenajeOperación De problemas Ayuda al clienteCuidado y limpieza del acondicionador de aire Partes Incluidas Herramientas QUE NecesitaráPartes QUE Usted Necesitará Deslizador DE LA Ventana Selección DEL Lugar AdecuadoLA Apertura Interna DEL Pedazo DE MADERA- Anchura 1″ Instale EL Deslizador DE Ventana EN LA VentanaPegue LA Manguera DE Escape Instale LA Abrazadera DE Cierre DE LA Ventana DE Escape AL Deslizador DE Ventana Pegue LA Manguera DE Escape AL Deslizador DE VentanaPegue LA Manguera Problema Causas posibles Qué hacer Solucionar problemasNosotros reemplazaremos Seguridad OperaciónPara hacer un reclamo de garantía Lo que no está cubiertoEstudio de diseño para la vida real Ayuda al cliente Página Web de GE AppliancesPiezas y accesorios Póngase en contacto con nosotros

APE08 specifications

The GE APE08 is a premier room air conditioner renowned for its efficiency and user-friendly features, making it an ideal choice for cooling individual rooms during hot summer months. With a cooling capacity of 8,000 BTUs, this portable unit is designed to cool spaces up to approximately 350 square feet, making it suitable for bedrooms, home offices, or living areas.

One of the standout features of the APE08 is its energy efficiency. It comes with an Energy Efficiency Ratio (EER) that meets or exceeds Energy Star standards, enabling users to enjoy a comfortable environment without incurring high electricity bills. This efficient operation is complemented by the unit’s eco-friendly refrigerant that minimizes environmental impact.

The GE APE08 is equipped with advanced features for optimal comfort and convenience. The unit includes multiple cooling and fan speeds, allowing users to customize airflow based on their needs. A programmable thermostat provides precise temperature control, letting users set their desired room temperature and maintain it consistently. Additionally, the 24-hour timer enables users to schedule operation, so the unit can cool the room before they arrive home.

Installation is made simple with the included installation kit, which allows for both single and double-hung windows. The unit is lightweight and portable, fitted with caster wheels, making it easy to move from room to room as needed.

Noise levels are also a consideration with the APE08, which operates quietly, allowing for restful sleep and undisturbed activities. Its sleek design and modern aesthetic make it a stylish addition to any room decor.

In summary, the GE APE08 is more than just a cooling unit; it combines advanced technology, energy efficiency, and user-centric features, ensuring it meets the needs of today’s consumers. Whether battling the summer heat or seeking additional comfort during warm evenings, the GE APE08 is a reliable choice that delivers performance and convenience without compromising on style.
Top Page Image Contents