Installation Instructions
3PREPARE THE AIR CONDITIONER (cont.)
CAttach the accordion panels to the case using 3 Type A screws on each side.
Top mounting rail
Accordion 
panel
Type A 
screws
BACK
Bottom mounting rail
4PREPARE THE WINDOW
Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.
5INSTALL THE AIR CONDITIONER IN THE WINDOW
APlace the air conditioner on the stool with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail.
It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside.
or | or |
|
Type C screws
BExtend the left and right accordion panels to the vertical window sashes and attach, through the holes in the panels, with 4 Type C screws, as appropriate.
6INSTALL A SUPPORT BRACKET AND THE FOAM TOP WINDOW GASKET
AAttach the support bracket with one Type C screw.
BCut the foam top window gasket to the window width.
CStuff the foam between the glass and the window to prevent air and insects from getting into the room.
11