GE AGP07 Storm Window Requirements, Prepare the Window, Prepare the AIR Conditioner

Page 9

Installation Instructions

1WINDOW REQUIREMENTS

These instructions are for a standard double-hung window. You will need to modify them for other types of windows.

The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.

All supporting parts must be secured to firm wood, masonry or metal.

The electrical outlet must be within reach of the power cord.

12″ min.

26″ to 3938

(With accordion panels)

22″ min.

(Without accordion panels)

2STORM WINDOW REQUIREMENTS

A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.

To adjust for this, attach a piece of wood to the stool.

WOOD PIECES–

WIDTH: 2

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

Wood

1/2″ higher

 

than frame

Stool

 

Storm window frame

3PREPARE THE WINDOW

ACut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.

Window

sash seal

INSIDE

BMark the centerline of the sill. Measure

and mark the location for the support bracket 1″ to the left of the centerline.

Sill

OUTSIDE

L

INSIDE

C

 

Center line

1left of center line

Stool

4PREPARE THE AIR CONDITIONER

Insert the frames for the accordion panels into the bottom mounting rail and the top frame guides. Attach the accordion panels to the side of the case by pressing them onto the mounting tabs.

9

Image 9
Contents Write the model and serial numbers here Model # Serial # Air ConditionersConsumer Support Troubleshooting Tips Safety PrecautionsGe.com Installation InstructionsPower Outage Recovery Feature Instructions Operating Instructions Safety InstructionsRemote Control About the controls on the air conditionerCool Mode SafetyFAN Mode Air Direction-Side-to-SideGrille and Case Care and cleaning of the air conditionerOutdoor Coils Air FilterBefore YOU Begin Electrical RequirementsTools YOU will Need Parts Included Installation InstructionsStorm Window Requirements Window RequirementsPrepare the Window Prepare the AIR ConditionerInstall the AIR Conditioner in the Window Install the Support BracketProblem Possible Causes What To Do Troubleshooting TipsNormal Operating Sounds We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Air Conditioner Warranty What Is Not CoveredGE Will Replace Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Extended WarrantiesAcondicionadores de Aire Operación Instalación ¡ADVERTENCIASolucionar problemas OperaciónApoyo al consumidor Acerca de los controles en el acondicionador de aire Instalación ProblemasSeguridad Apoyo alModo de FAN Ventilador Modo Cool FríoDirección del aire-de lado a lado Dirección del aire-hacia arriba y hacia abajoInstalación Apoyo al consumidor Solucionar problemas Cuidado y limpieza del acondicionador de airePrecaución no Opere el Requisitos Eléctricos Antes DE IniciarPartes Incluidas Herramientas QUE NecesitaráRequisitos DE UNA Ventana DE Tormentas Requisitos Para LA VentanaPrepare LA Ventana Prepare EL Acondicionador DE AireInstale EL Acondicionador DE Aire EN LA Ventana Solucionar problemas Problema Causas posibles Qué hacerSeguridad Operación Instalación En la bandeja Se acumula aguaLa función de No está funcionandoSonidos de operación normales Notas Seguridad Operación Garantía de su acondicionador de aire de GEGE reemplazará Lo que no está cubiertoSolicite una reparación Apoyo al consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesorios