Tips Consumer Support | GE AEM18*, AEM25*, AEH25*, AEH18* specification

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Operating Instructions

Care and Cleaning

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Tips

Consumer Support

Troubleshooting

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip

or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

AEH18, AEM18, AEH25, AEM25 specifications

General Electric (GE) has made significant strides in the evolution of its gas turbine technology with the introduction of the AEM18*, AEM25*, AEH25*, and AEH18* series. These models are engineered to meet the growing demands for efficient, reliable, and environmentally responsible energy generation.

The AEM18* and AEM25* models focus on advanced aerodynamics and materials science to deliver high efficiency and performance. These turbines utilize a state-of-the-art combustion system that enables low emissions operation while maintaining operational flexibility. The AEM series is renowned for its capabilities in combined cycle applications, offering a high power-to-weight ratio which enhances overall system efficiency.

The AEH25* and AEH18* models build upon the advanced technology established in the AEM series but introduce enhancements aimed at heavy-duty and industrial applications. With innovative design modifications, including improved rotor dynamics and robust cooling techniques, these turbines achieve excellent reliability and availability. The AEH series is designed with high operational flexibility, capable of handling high load variations while providing consistent performance.

All four turbine models share GE's commitment to utilizing advanced digital technologies, including the Predix platform, which harnesses the power of analytics. This technology allows operators to monitor performance in real time, predict maintenance needs, and optimize operational parameters, resulting in reduced downtime and improved efficiency.

In terms of characteristics, the AEM and AEH series turbines are characterized by their modular design, which simplifies installation and maintenance processes. This design allows for easier upgrades and retrofits, ensuring that customers can adapt their systems to future technological advancements.

The environmental impact of these gas turbines cannot be understated. Both the AEM and AEH series are designed to meet rigorous emissions standards, showcasing GE's commitment to sustainability. With reduced greenhouse gas emissions and the capacity to integrate with renewable energy sources, these turbines serve as a key component in the transition to cleaner energy systems.

In summary, the GE AEM18*, AEM25*, AEH25*, and AEH18* turbines represent a culmination of innovative engineering, advanced technology, and a focus on environmental sustainability, making them suitable choices for a variety of energy generation applications in today's dynamic energy landscape.