Heath Zenith manual Operation, Model SL-5597, Features, Requirements, Dual Brite Timer

Page 1

Dual BriteMotion Sensor Light Control for Canadian Tire

Model SL-5597

Features

Turns on lighting when motion is detected.

Automatically turns lighting off.

Dual Brite™ Timer.

Photocell keeps the lighting off during daylight hours.

LED indicates motion was sensed (day or night).

This package includes:

OPERATION

Mode:

On-Time:

Works: Day

Night

 

 

 

 

Test

5 Sec

x

x

Auto

1, 5, 20 min.

 

x

Manual

Until Dawn*

 

x

 

 

 

 

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch ON-TIME DUAL BRITE™

on the sensor bottom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to TEST and the Dual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off 3 6 Dusk to

TEST 1 5 20

Brite™ switch OFF.

 

 

 

 

 

 

 

Dawn

 

 

 

 

 

 

 

 

 

 

 

AUTO

 

 

 

 

 

 

 

 

Put the ON-TIME switch in the 1, 5,

 

 

ON-TIME

or 20 minute position. TEST 1 5 20

MANUAL MODE

Lamp

6 Screws

Holders

(3 sizes included)

Gasket

Cover

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON- TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

Plate Sensor

Light Control

 

 

2 Wire

 

 

Connectors

Mounting Bolt

Mounting Strap

 

 

 

 

Plastic Hanger

2 Lamps

Rubber Plug

 

 

(installed)

 

 

Requirements

The Light Control requires 120-volts AC.

If you want to use the Manual Mode, the control must be wired through a switch.

Some codes require installation by a qualified electrician.

This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

© 2003 DESA Specialty Products™

... back on.

 

Mode Switching Summary

 

 

 

 

 

 

 

 

TEST

 

 

 

Move ON-TIME Switch to

 

 

 

 

 

 

 

 

 

 

 

 

 

1, 5, or 20 minutes

 

 

 

 

 

 

 

 

AUTO

 

 

 

 

 

Flip light switch off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

for one second then

 

 

 

 

 

 

 

 

back on*

MANUAL MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

Dual Brite™ TIMER

Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., until dawn). If motion is sensed, the light turns on full bright for the ON-TIME (1,5, or 20 minutes) then returns to dim mode.

598-1038-03

Image 1
Contents Dual Brite Timer FeaturesOperation Model SL-5597Bulb Installation InstallationWire the Light Control Mount the Light ControlSpecifications Test and AdjustmentBottom of Sensor Range Coverage AngleIf you experience a problem, follow this guide Troubleshooting GuideSee your Canadian Tire retailer for warranty information Modelo SL-5597 FuncionamientoCaracterísticas RequisitosInstalación DE Bombilla InstalacionConecte EL Control DE LUZ Instale EL Control DE LUZEspecificaciones Prueba Y AjusteParte de abajo del detector Guia DE Investigacion DE Averias Si tiene algún problema siga esta guíaModèle SL-5597 FonctionnementCâblage DE LA Commande D’ÉCLAIRAGE Installation DE L’AMPOULEMontage DE LA Commande D’ÉCLAIRAGE Fiche Technique Essais ET RéglagesBas du détecteur Le moins sensible Le plus sensibleSi vous éprouvez des difficultés, suivre ce guide Guide DE Dépannage