Panasonic CQ-5330U Clock Setting, Selecting the Clock Display, Initial Time, Time Reset

Clock Setting

Selecting the Clock Display

Press [CLK] (clock) to switch clock and alarm time display both.

clock display Alarm time display

Note: if no operation takes place for more than 5 seconds in alarm time, the display returns to the clock display.

The 12-hour system is used for the clock.

Initial Time

“SET” is displayed when the clock is not adjusted.

CLK

PWR

ALM
PUSH SEL/SAT	DISP	CQ-5330U					LOUD
VOL
	MODE						MUTE
							TUNE
	BAND	DISC		CD SCAN	RPT	RDM	SEEK
							SCAN
BASS/TREB/BAL/FADER	1	2	3	4	5	6	ILL
	APM

Time Setting

q Press and hold [CLK] (clock) and do not release to set time. Display blinks and the time setting mode is activated.

(blink.)

Hours

w Press [{] to set the hour.

(Hours set.)

[{TUNE], [}TUNE]

(Hours, Minutes)

Minutes

e Press [}] to set the minute.

(Minutes set.)

r Once the time has been set, release [CLK].

(End.)

Note: Press and hold [{] or [}] to change numbers rapidly.

Time Reset

When you want to reset the time, repeat steps q to r.

Note: the current time will be displayed at all the time even the power of the radio is turned off.

7

CQ-5330U