Speaker Connections, Product Servicing, Wrong

Panasonic CQ-5330U operating instructions Speaker Connections, Product Servicing, Wrong, Chassis

Page 24

Speaker Connections

Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

		<Right>
L +		(White)
L +		+
	-	+
		-
		(White
		w/black stripe)
	+	(Gray)
R	+	+
R	-	-
		(Gray
		w/black stripe)

<Wrong>

•Use ungrounded speaker only.

•The maximum speaker input should be 37 W or more. (If used with the optional power amplifier, the speaker input should be higher than the maximum amplifier output.)

•The speaker impedance should be 4 - 8 Ω.

•This unit uses the BTCL circuit, so each speaker should be connected separately using parallel vinyl insulated cords.

•The speaker cords and the power amplifier unit should be kept away (about 30 cm apart) from the antenna and antenna extension cord.

L	+	+
L	-	-

	Chassis
+	+
R -	-

Chassis

•Never connect the speaker cord to the body of the car.

L	+	+	L	+	+	+
L	-	-	L	-	-	-
	+	+		+	+	+
R -		-	R -		-	-

• Do not use a 3-wire type speaker	• Do not connect more than one
system having a common earth	speaker to one set of speaker
lead.	leads.

Product Servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.

Caution

This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start smoking, ignite or other malfunction.

If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A or a circuit breaker at the BATTERY lead of your vehicle's harness. please see page 26 to find out where "BATTERY + 12 V" is for your dealer adding the fuse or the circuit breaker.

CQ-5330U

Image 24

Contents

CQ-5330U Safety Information Following applies only in the U.S.ALaser Products Wave length 780 nm FCC WarningWhen Driving When Washing Your CarUse Authorized Servicenters When ParkedContents Power and Sound Controls PowerRemote Control Signal Sensor Power on Press PWR powerIllumination Switching BassTreble BalanceClock Setting Time ResetSelecting the Clock Display Initial TimeAlarm Time Setting Initial Alarm TimeAlarm Operation Alarm output Volume SelectionRadio Radio Preset Station Setting Auto Preset Memory APMManual Preset Memory Preset Station CallingTuning in a Weather Band Station Weather Band StationsCD Player Disc Insert and Playback Disc insertStop and Disc Eject Listening to a CDTrack Selection Track Search Repeat play Random play Scan playCD Changer mode CD Changer ControlDisc Selection Track SelectionRemote Control Scan Play Tracks DiscsRepeat Play Tracks Discs Random Play Tracks DiscsXM Mode XM ControlChannel Scan Channel SelectionManual Preset Memory Select a band Press 1 toPress and hold Mode Disp for more than 2 seconds XM ID is or communication fails, Press Mode to another modeTroubleshooting Preliminary StepsCommon Radio Sound Setting XM ControlError Display Messages CD changerCheck the disc Select the next available compact disc. Check the discMaintenance Cleaning this UnitCare of the Unit Speaker Connections Product ServicingWrong ChassisInstallation Guide Dashboard SpecificationsOverview Installation Dashboard InstallationInstallation Hardware Using the rubber cushion optionMounting springs C ExampleTabTo Remove the Unit from the vehicles dashboard Insert each Removal Tool i and pull Removal Tool U-shapedWiring Diagram Electrical ConnectionsCD Receiver XM ANT APM/ PRG Disp VOL Seek Tune Band Mode Specifications GeneralFM Stereo Radio AM RadioMemo Memo One Panasonic Way, Secaucus New Jersey

Panasonic CQ-5330U operating instructions Speaker Connections, Product Servicing, Wrong, Chassis