Operating other equipment (continued)
Optional USB connection and operation (continued)
Compatible Devices
•Devices which are defined as USB mass storage class:
–USB devices that support bulk only transfer.
–USB devices that support USB 2.0 full speed.
Supported Formats
| File name | File extension |
|
|
|
Still pictures | JPG | .jpg .jpeg |
|
|
|
Music | MP3 | .mp3 |
| WMA | .wma |
|
|
|
Video | MPEG4 ∗ | .asf |
|
|
|
∗For Panasonic D-Snap/DIGA
Note
•CBI (Control/Bulk/Interrupt) is not supported.
•Digital Cameras that use PTP protocol or which require additional program installation when connected to a PC are not supported.
•A device using NTFS fi le system is not supported.
[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is supported].
•Depending on the sector size, some fi les may not work.
•It will not operate with Janus enabled MTP (Media Transfer Protocol) devices.
•Maximum folder: 400 folders
•Maximum fi le: 4000 fi les
•Maximum fi le name: 44 characters
•Maximum folder name: 44 characters
•Only one memory card will be selected when connecting a multi- port USB card reader. Typically the fi rst memory card inserted.
Adjusting the Speaker output level automatically: Auto speaker setup
OTHER OPERATIONS ENGLISH
For Australia and N.Z.
For Continental Europe
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia, Kuwait, Australia and N.Z.
The speaker level settings can be optimized to accommodate your room’s listening conditions so that you can enjoy the ideal surround sound experience. Using the supplied setup microphone, the main unit adjusts the balance of the front speakers, and the volume level of the center and surround speakers automatically.
Keep as quiet as possible during the Auto speaker setup. Loud voices,
Preparation
•Turn off the television before starting the Auto speaker setup.
•Make sure that “DVD/CD” is selected as the source and there are no discs in the tray.
•Ensure that headphones are disconnected.
•Speakers with wireless system, ensure that the speakers are linked to the main unit.
1 While stopped
Connect the setup microphone.
2 Place the microphone at actual seating position. (At ear level when seated).
3 To start the setup.
(Press and hold)
AUTO SPEAKER SETUP → CENTER → RIGHT COMPLETE ← LEFT ← SRD L ← SRD R
•The test signal is output from each speaker.
•“COMPLETE” is displayed when Auto speaker setup is completed.
To cancel the setup.
(Press and hold)
•“CANCEL” will be displayed if Auto speaker setup is canceled.
Note
•Audio settings will be restored to default if the Auto speaker setup is canceled.
•Please refer to the Troubleshooting guide if there is any error message.
RQTX0038
38
RQT8043