ENGLISH
Speaker assembly (continued)
Speaker installation options
7Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
•The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k
per screw. Consult a qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
GETTING STARTED
1 Drive the screw (not included) into the wall
At least 30 mm
Ø4.0 mm 
Ø7.0 to 9.4 mm
Wall or pillar | 4.0 to 6.0 mm |
|
∗Front and Surround speakers:
2 Fit the speaker securely onto the screw(s) with the hole(s).
∗ Front/Surround speakers | Center speaker |
Attach to a wall without the base |
|
and stand. |
|
| 190 mm |
| Surround speaker |
384 mm |
|
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait
Front speakers:
For Continental Europe, Australia and N.Z.
7Fitting speaker stands (not included)
(For center and satellite surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
•The stands must be able to support over 10 k
.
•The stands must be stable even if the speakers are in a high position.
Example: Center speaker
| Metal screw holes |
| For attaching to speaker stands |
5 mm, pitch 0.8 mm |
|
Plate thickness plus |
|
7 mm to 10 mm | Speaker stand |
| |
60 mm | (not included) |
RQTX0038
10
7Reattach the speaker cable
1 Insert the cable from the bottom.
Leave about 80 mm
2 Pull out the cable through the hole.
RQT8043