Motorola DCT6208 manual Guide Setup, Cable Box Setup

Setup

You can activate and customize certain i-Guidefeatures such as the Flip Bar Posistion, Lock options, Cable Box settings, Audio settings and Languages from the Setup Menu.

Guide Setup

Use your remote to select Setup from the Main Menu, then select Guide

Setup. Use the34 buttons to select from the following setup options:

•Flip Bar Position – The Flip Bar can appear either at the top or bottom of your screen.

•Flip Bar Timeout – Change the amount of time in which the Flip Bar will stay on your screen from 3 to 15 seconds.

•Auto-Tune –

•Yes – Automatically tunes after 2 seconds when you enter numbers directly on your remote.

•No – Enter 3 digits or press OK after entering numbers on the remote.

•Message – Select On to make the message envelope appear when a new message is received.

•Reminder Notice – Adjust the amount of time before the start of a program in which the Reminder Notice will appear from 1–15 minutes.

•Listing Grid Height – Adjust the listings for single- or dual-height grid display.

Cable Box Setup

Time Display –

•Off - Displays the currently tuned channel on the front of the cable box.

•On - Displays the current time on the cable box.

AC Outlet –

•Switched - Determines that power is available only when the cable box is on.

•Unswitched - Means that power is always available to the outlet on the back of the cable box. See Configuration –

•Highlight and press OK to show the configuration screen (includes information your cable company may need in the event of a problem with your service).

SETUP

31