Motorola DCT6208 manual DIGITAL CABLE BOX / DCT2000

DIGITAL CABLE BOX / DCT2000

14

	Key	Description
1	TO TV/VCR	This coaxial output connector is used to connect the DCT2000 to a TV or VCR
		operating on channel 3 or 4.
2	CABLE IN	The CABLE IN connector receives the incoming signal from your cable
		service provider.
3	ETHERNET	Not currently enabled - intended for future use.
4	AUDIO IN R	These connectors are used to connect a set-top between a peripheral audio
	AUDIO IN L	device such as a CD player and a stereo tuner or A/V receiver. In the current
		DCT2000 release, the audio from the peripheral device will pass through the
		DCT2000 when it is turned off.
5	SPDIF	The orange coaxial SPDIF connector is a digital output connection that carries
		Dolby Digital 5.1 audio or PCM audio.
		It is used to connect the DCT2000 to a stereo tuner or A/V receiver to provide
		surround-sound, theater-style audio.
6	VIDEO IN	The VIDEO IN connector accepts a baseband video input from a VCR, camcorder
		or other video device. (Not currently enabled.)
	VIDEO OUT	The VIDEO OUT connector is used to deliver baseband video to an external device
		such as a VCR or TV.
7	OUTLET	This AC outlet may be used to plug your TV into the DCT2000 as a convenient
		additional outlet.
8	IR	This connector enables the DCT2000 to control a VCR while recording a selected
		program. Not all electronic program guides support this feature.
9	USB	Not currently enabled - intended for future use.
10	DVI-D	Digital Video Interface. To connect High Definition monitor or High
		Definition television.
11	AUDIO OUT R	The RCA phono-type connectors are used to deliver audio to a stereo receiver.
	AUDIO OUT L
12	Y Pb Pr	These connectors are used to deliver component video to an HD-ready TV or
		monitor. Though capable of delivering standard definition video to your TV or
		monitor, these cables are necessary to deliver High Definition video.
13	TV PASS CARD	For future use.
14	S-VIDEO	This connector is used to deliver high quality, standard definition video to
		external devices that accept S-Video inputs, such as a high-end VCR or TV.
15	OPTICAL	The OPTICAL SPDIF connector is an optical digital output connection that carries
	SPDIF	Dolby Digital 5.1 audio or PCM audio.
		It is used to connect the DCT2000 to a stereo tuner or A/V receiver to provide
		surround-sound, theater-style audio.
16	IEEE 1394	Firewall Digital Interface. To connect High Definition monitor or High
		Definition television.
17	POWER INLET	For the female end of the supplied power cord.