Grizzly T25100 owner manual Setup, Unpacking, Box Inventory Figures Qty

SECTION 3: SETUP

Unpacking

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

SUFFOCATION HAZARD!

Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately.

Inventory

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

Model T25100 (Mfg. Since 8/12)

Box Inventory (Figures 2–3):		Qty
A.	Powder Coating System	1
B.	powder Cups w/Gaskets & Lids	2
C.	Moisture Filter	1
D.	powder Flow Regulator Screw O-Ring	1
E.	Fuse 0.5A, Fast-Acting	1
F.	Scatter Tip 1⁄2"	1
G.	scatter Tip 3⁄4"	1
H.	scatter Tip 1"	1

A

Figure 2. Powder coating system.

B

H

GC

F

E D

Figure 3. Small item inventory.

-9-