Advanced operations
| Auto Power Down |
| Dimmer mode | |
|
|
|
|
|
The main unit is automatically turned off if there is no audio input and when you do not use it for approx. 2 hours.
While pressing and holding [CLEAR VOICE] on the remote control, press and hold [INPUT] on the main unit for more than 4 sec to display the current setting.
ャュバュヷュ “BD/DVD” indicator blinks:
Auto Power Down is on.
ヤロユモンチヷヰリヤユ “CLEAR VOICE” indicator blinks:
Auto Power Down is off.
While the setting is displayed, press [CLEAR VOICE] to select the setting.
≥The setting changes each time [CLEAR VOICE] is pressed.
≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode.
≥The setting is maintained until it is changed again.
≥Default setting of this function is off.
Bluetooth® Stand-by
This function allows you to connect a paired Bluetooth® device when the main unit is in standby mode.
While pressing and holding [SURROUND] on the remote control, press and hold [ 
] on the main unit for more than 4 sec to display the current mode.
ャュバュヷュ “BD/DVD” indicator blinks:
Bluetooth®
ヤロユモンチヷヰリヤユ “CLEAR VOICE” indicator blinks:
Bluetooth®
You can turn off dimmer mode and keep the LED indicators bright.
While pressing and holding [INPUT] on the remote control, press and hold [s VOL] on the main unit for more than 4 sec to turn off Dimmer mode.
≥The indicator for the current condition will turn brighter.
≥The setting is maintained until it is changed again.
≥Default setting of this function is on.
To turn on dimmer mode, repeat the operation above. After performing the operation, the indicator for the current condition will be dim.
Others
∫Remote control code
When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control.
Preparation
≥Turn off all other Panasonic products.
≥Turn on the main unit.
Change the remote control code to code 2:
1Aim the remote control at the main unit’s remote control sensor.
2Press and hold [MUTE] and [ 
] on the remote control for more than 4 sec.
≥All the indicators will blink for 10 sec when the code of this system is changed.
ヵヷ | ャュバュヷュ | ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ |
≥The setting is maintained until it is changed again.
≥If the main unit does not operate after changing the code, repeat steps 1 and 2.
≥To change the remote control code to code 1, repeat the steps above, but replace [ 
] with [INPUT].
While the mode is displayed, press [SURROUND] to select the mode.
≥The setting changes each time [SURROUND] is pressed.
≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode.
≥The setting is maintained until it is changed again.
≥Default setting of this function is off.
16 VQT5J41
∫To turn off the volume limitation
If a state of the lowered volume disturbs you every time the main unit turns on, for example, it is possible to turn off this function as follows:
While pressing and holding [MUTE] on the remote control, press and hold [VOL i] on the main unit for more than 4 sec.
≥All the indicators will blink once when the volume limitation is turned off.
ヵヷ | ャュバュヷュ | ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ |
To reset the setting, return to the factory preset. (> p. 17)