Panasonic SC-HTB8 About Bluetooth, Unit care, License, Frequency band used, Restrictions of use

Page 19
About Bluetooth®

About Bluetooth®

Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission.

Frequency band used

This system uses the 2.4 GHz frequency band.

Certification of this device

This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.

The action below are punishable by law in some countries:

j Taking apart or modifying the unit. j Removing specification indications.

Restrictions of use

Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed.

All devices must conform to standards set by Bluetooth SIG, Inc.

Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.

This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.

This system cannot transmit data to a Bluetooth® device.

Range of use

Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference.

Interference from other devices

This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth® devices or the devices that use the 2.4 GHz band.

This system may not function properly if radio waves from a nearby broadcasting station, etc. are too strong.

Intended usage

This system is for normal, general use only.

Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc).

Unit care

Clean this system with a soft, dry cloth

When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth.

Never use alcohol, paint thinner or benzine to clean this system.

Before using chemically-treated cloth, carefully read the instructions that came with the cloth.

To dispose or transfer this system

This system may keep the user settings information in the main unit. If you discard the main unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings.

(> p. 17, “To return to the factory defaults.”)

The operation history may be recorded in the memory of the main unit.

License

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

Reference

VQT5J41 19

Image 19
Contents VQT5J41 Included Installation InstructionsModel No. SC-HTB8 Unit AC power supply cordButton-type battery Lithium battery DO NOT INGEST BATTERY CHEMICAL BURN HAZARDFCC Note PlacementThe following mark and symbols are located on bottom of the unit PrecautionsUsing this system Limited WarrantyIMPORTANT SAFETY INSTRUCTIONS Step 2 PlacementSupplied items Accessory∏ 1 Remote control with a battery N2QAYC000102 Precautions Before use Getting started Operations ReferenceThis system Rear 1 Standby/on switch Í/IControl reference guide This system Front∫ About remote control signal sensor Remote controlBefore using for the first time To replace a button-type batteryConnection with the TV A AC power supply cord connectionD AC power supply cord Step 1 ConnectionsSelect “SC-HTB8” from the Bluetooth menu of your device Bluetooth connectionBluetooth pairing Press to select “ ” Press and hold until the “ ” indicator flashes quicklyProfessional installation is required Step 2 PlacementSafety Precautions Wireless interferenceWhen placing the main unit in front of the TV Selecting the placement methodWhen placing the main unit on a rack or on a table When attaching the main unit to a wallAttach the cord to the main unit When placing the main unit on a rack or on a tableAdditionally required accessories commercially available Slide the MULTI ANGLE switch to “RACK/TABLE TOP”Slide the MULTI ANGLE switch to “WALL MOUNT” When attaching the main unit to a wallFront view semi-transparent image Drive a screw into the wallFit the main unit securely onto the screws Secure the cord to the wallWhen “BD/DVD” is selected as the source Using this systemTo adjust the volume of this system ∫ When “ ” is selected as the sourceTo turn off the volume limitation Auto Power DownBluetooth Stand-by Others Remote control codeTo return to the factory defaults TroubleshootingBluetooth Pairing cannot be doneNo sound The volume is lowered when the main unit is turned onThere is no audio The power of the main unit turns off automatically SoundLicense About BluetoothClean this system with a soft, dry cloth Unit careThe indicator blinks for 20 sec Indicator illuminationIndicator Description The indicator blinks for 20 secFTC output power Stereo mode Front ch both ch driven SpecificationsBluetooth SECTION Total RMS Stereo mode powerOnline Repair Request Panasonic Products Limited WarrantyLimited Warranty Coverage For USA Only Limited Warranty Limits And ExclusionsVQT5J41 Panasonic Corporation of North America If you see this symbolVQT5J41 F0314KE0 Information on Disposal in other Countries outside the European Union