Motorola XT894 Bluetooth handsfree devices, Turn Bluetooth power on or off, Connect new devices

3Touch Configure Mobile Hotspot to change hotspot security and configuration settings:

•Network SSID—Enter a unique name for your hotspot and touch Next.

•Security—Select the type of security you want, and touch Save: WEP, WPA, or WPA2. Enter a unique password. Other users can access your Wi-Fi hotspot only if they enter the correct password.

Note: Keep it secure. To protect your phone and hotspot from unauthorized access, it is strongly recommended that you set up hotspot Security (WPA2 is the most secure), including password.

•Broadcast Channel—Select a channel that minimizes potential interference. You may need to try different channels after your hotspot is active for a time.

4Touch Save when the settings are complete.

When your Wi-Fi hotspot is active, other Wi-Fi enabled devices can connect by entering your hotspot’s SSID, selecting a Security type, and entering the correct

Wireless password.

Bluetooth® handsfree devices

Turn Bluetooth power on or off

Find it: Menu > Settings > Wireless & networks

>Bluetooth

Note: To extend battery life, turn off Bluetooth power when not in use.

Connect new devices

Note: This feature requires an optional accessory.

To connect with a new device, you need to pair with it. You only need to do this once for each device—to connect again, just turn on the device.

1Make sure the device you are pairing with is in discoverable mode.

Note: Refer to the guide that came with the device for details.

2Touch Menu > Settings > Wireless & networks > Bluetooth settings.

3Touch Bluetooth to turn on and scan. If Bluetooth power is already on, touch Scan for devices.

4Touch a device to connect.

5If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth connected indicator appears in the status bar.

44Wireless