CAUTION
Unit
≥Do not place sources of naked flames, such as lighted candles, on this unit.
≥Product Identification Marking is located on the bottom of the unit.
Placement
≥To reduce the risk of fire, electric shock or product damage,
j Do not install or place this unit in a bookcase,
j Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.
≥Keep out of reach of children.
≥Insert with poles aligned.
≥Mishandling of batteries can cause electrolyte leakage and may cause a fire.
j Remove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.
j Do not heat or expose to flame.
j Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.
j Do not touch the terminals (i and j) with metal objects. j Do not recharge, disassemble, remodel, heat or
throw into fire.
≥When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
The following mark and symbols are located on bottom of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ
‘
This transmitter must not be
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least
20cm (7 7/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
‘
FCC ID:ACJ-SC-HTB8
Precautions
VQT5J41 3