Switching the communication quality

You can change the transmission speed to prioritise sound quality or connectivity.

•The default setting is “Emphasis on sound quality”. When the sound is interrupted, select “Emphasis on connectivity”.

While pressing and holding [LP], press and hold [ ] for 4 seconds or more. Emphasis on connectivity:

A beep sound is emitted once, and the Bluetooth® indicator (blue) and the LP mode indicator (green) flash once.

Emphasis on sound quality:

A beep sound is emitted twice, and the Bluetooth® indicator (blue) and the LP mode indicator (green) flash twice.

Note

•Press [LP], and within 2 seconds, press [ ]. If [ ] is pressed after this time limit, the LP mode setting will be changed.

Disconnecting Bluetooth®

•Turn off this unit or the device.

•Stop / disable the Bluetooth® transmission of the device.

•(For NFC-compatible devices only)

Touch and hold your device to NFC touch area of this unit again.

Note

•This unit can only be connected to one device at a time.

•This unit can register up to 8 devices.

When the number of registered devices exceeds the maximum limit, a device that has not made a Bluetooth® connection for the longest time will be replaced. This will cancel the registration of the device. To use the device again, re-register it.

•If the unit connected to the AC adaptor is selected from a Bluetooth® device, the unit will turn on automatically even when it is turned off, establishing a Bluetooth® connection.

•If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable (commercially-available).

•The One-Touch Connection may not work properly depending on the type of device being used.

•Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.

•Refer to the operating instructions of the Bluetooth® device for details.

VQT5C51