Panasonic SC-THB880 owner manual Troubleshooting, General operation

Page 26

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to “Customer Services Directory (United States)” on page 32 if you reside in the U.S.A. or refer to “Limited Warranty (ONLY FOR CANADA)” on page 33 if you reside in Canada.

To return to the factory defaults.

While the main unit is on, touch and hold [Í/I] on the main unit for more than 4 sec.

(“RESET” is indicated on the display when this system is reset.)

If this system does not operate as expected, returning the settings to the factory defaults may solve the problem.

≥The remote control code will return to “REMOTE 1” when this system is returned to the factory preset. To change the remote control code, refer to page 20.

General operation

No power.

≥Unplug the AC power supply cord for 10 sec before plug in again.

≥After turning the main unit on, if the main unit immediately turns off, unplug the AC power supply cord and consult your dealer.

≥If the main unit does not turn on by turning on TV (HDAVI control), manually turn on the main unit. If the problem persists, refer to “HDMI” in “Troubleshooting”.

The remote control does not work properly.

≥The battery is dead. Replace the battery with a new one. (> p. 8)

≥It is possible that the insulation sheet has not been removed. Remove the insulation sheet. (> p. 8)

≥It may be necessary to set the code of the remote control again after changing the battery of the remote control. (> p. 20)

≥Use the remote control within the correct operation range. (> p. 8)

The main unit is automatically switched to standby mode.

“AUTO POWER DOWN” function is on.

The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approximately 20 minutes. Refer to page 24 to turn this function off.

The main unit is turned off when the TV’s speakers are selected in the speaker control. This is a normal feature when using VIERA Link (HDAVI Control 4 or later). Please read the operating instructions for the TV for details about its power save feature. (> p. 25)

The switches on the main unit do not work.

[Í/I], [j VOL i], [INPUT], and [ ] on the main unit are touch keys. Touch the switches with your finger. They may not work if operated with your fingernails or hands wearing gloves.

HDMI

This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI AV IN1, HDMI AV IN2 or HDMI AV OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC power supply cord and reconnect the HDMI cable(s). (> p. 9, 10)

VIERA Link related operations no longer function properly.

≥Check the VIERA Link setting on the connected devices. jTurn on VIERA Link function on the

connected devices.

jSelect this system as the speaker in the TV's VIERA Link menu.

≥Check if the VIERA Link settings are off. (> p. 24)

≥When the HDMI connections are changed, after a power failure or after the AC power supply cord has been removed, VIERA Link operations may not function properly. jTurn on all the devices that are connected to the

TV with an HDMI cable and then turn the TV on. jTurn off the VIERA Link settings of the TV and

turn it on again. For details refer to the operating instructions for the TV.

jWhile the main unit and the TV are connected with the HDMI cable, turn on the TV and then remove the main unit’s AC power supply cord and reconnect it again.

The first few seconds of audio cannot be heard when using the HDMI connection. This may occur during DVD-Video chapter playback. Change the digital audio output setting on the connected device from “Bitstream” to “PCM”.

When operating an HDMI compatible device of a different brand, the main unit reacts in an unwanted manner.

HDAVI Control commands may use a different signal depending on the brand of the device. In this case, turn VIERA Link off. (> p. 24)

26 RQT9903

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Included Installation Instructions Home Theater Audio SystemDo not Ingest Battery Chemical Burn Hazard AC power supply cordButton-type battery Lithium battery UnitFCC Note PlacementFollowing Applies only in the U.S.A Following Applies only in CanadaTable of contents This system SC-HTB880 AccessoriesSupplied items This system Front Standby/on switch Í/IControl reference guide Main unit Active subwooferThis system Rear Left side Right sideTo replace a button-type battery Remote controlBefore using for the first time About remote control signal sensorConnections Make the connectionNot labeled Hdmi ARC Connection from an Hdmi compatible devicePreparation Hdmi cable Optical digital audio cableHdmi standby pass-through Using the IR BlasterConnect the jack plug to the main unit’s Ir System terminal 3D compatibilityAC power supply cord supplied AC power supply cord connectionPlacement example ≥ Connect only after all other connections are completedWireless interference PlacementSafety Precautions Active subwooferWhen attaching the main unit to a wall Selecting the placement methodWhen placing the main unit on a rack or on a table When placing the main unit in front of the TVAttach the cord to the main unit When placing the main unit on a rack or on a tableAdditionally required accessories commercially available ∏ 2 Screws∏ 2 Wall mount brackets When attaching the main unit to a wallSupplied accessories ≥Screws for wall mounting ≥Fall prevention cordWall mount bracket supplied B Screw supplied Attach the wall mount brackets to the main unitDrive a screw into the wall Front view semi-transparent imageDo not Fit the main unit securely onto the screwsSecure the cord to the wall Bluetooth connection Wireless connectionsActive subwoofer wireless connection Preparation Start playback on the Bluetooth device Remote control codeOne-Touch Connection Connecting by NFC To set the code to RemoteUsing this system 3D sound Sound menuAudio format Setup menu What is Viera Link Hdavi Control? Linked operations with the TV Viera LinkTM Hdavi ControlTMTroubleshooting General operationBluetooth SoundMain unit displays Active SubwooferLicenses About BluetoothUnit care Specifications Bluetooth Section Limited Warranty Limits And Exclusions Limited Warranty only for U.S.ALimited Warranty Coverage For USA Only Online Repair RequestPanasonic Canada Inc Limited Warranty only for CanadaWarranty Service Limitations and ExclusionsPanasonic Corporation of North America Panasonic Canada Inc

SC-THB880 specifications

The Panasonic SC-THB880 is a cutting-edge home theater system designed to deliver an immersive audio experience, making it a standout choice for movie enthusiasts and music lovers alike. Built to bring cinema-quality sound to your living room, this system combines advanced technologies with a sleek, modern aesthetic.

One of the main features of the SC-THB880 is its powerful 5.1-channel surround sound system, which provides a truly dynamic audio experience. With a total output of 1,000 watts, the system encompasses a subwoofer and five satellite speakers, ensuring that every sound is rich and clear. The inclusion of a wireless rear speaker configuration offers convenience while maintaining the integrity of the surround sound experience, eliminating the need for cumbersome cables.

The SC-THB880 is equipped with advanced sound technologies, including Dolby Atmos and DTS:X, which create a three-dimensional audio environment. These formats enable sound to come from all directions, allowing users to enjoy movies and music as if they were in a live performance or a cinematic setting. The system also features Panasonic’s proprietary Clear Mode Dialogue technology, which enhances speech clarity, ensuring that dialogue remains distinct even during the most action-packed sequences.

In terms of connectivity, the SC-THB880 is versatile, supporting Bluetooth and Wi-Fi streaming. Users can easily connect their smartphones or tablets to play their favorite playlists, complementing the home theater experience with high-quality sound. The built-in HDMI ARC (Audio Return Channel) simplifies connections to other devices, allowing seamless interactions with TVs and other media players.

The system also comes with a user-friendly setup and control interface. The intuitive remote control and the option for smart device integration make it easy for users to navigate the various features. Users can customize sound settings to suit their preferences, adjusting levels for each speaker and utilizing preset modes for movies, music, and gaming.

In summary, the Panasonic SC-THB880 is a powerful and feature-rich home theater system that elevates audio experiences with its impressive surround sound capabilities and modern connectivity options. Its combination of advanced sound technologies, powerful output, and user-friendly design makes it an ideal choice for anyone looking to enhance their home entertainment setup.
Top Page Image Contents