![](/images/new-backgrounds/1000331/33129x1.webp)
When placing the main unit on a rack or on a table
Additionally required accessories (commercially available)
≥Fall prevention cord | k 2 |
≥Screw eyes (to attach the fall prevention cord) | k 2 |
|
|
≥Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs).
≥Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).
Attach the cord to the main unit.
ACord§
§If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).
Place the main unit in the desired position and attach each cord onto the rack or table.
≥Make sure that the slack of the cord is minimal.
≥Do not lean the main unit against the TV or wall.
BScrew eye
≥Attach at a position capable of supporting over 33 kg (72.8 lbs).
≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.
RQT9903 15
Precautions
Getting started