Pelco C1621M-E (9/08) 3 manual Attaching Rack Rail Spacers Repeat for the second spacer

Page 18

8.Attach one rack rail spacer to the front of the equipment rack (refer to Figure 13):

a.Position the bottom hole of the spacer above the ear of the front-mount rail.

b.Insert two 10-32 x 0.5-inch Phillips flat head screws into the spacer, one in the top hole and one in the bottom hole. Leave the middle hole empty; the top thumbscrew on the NVR5100 will use it.

c.Tighten the two screws to secure the spacer to the rack.

(2) SCREWS

10-32 X 0.5-INCH PHILLIPS FLAT HEAD

SPACER

Figure 13. Attaching Rack Rail Spacers

9.Repeat step 8 for the second spacer.

10.Tighten the 8-32 x 0.375-inch Phillips truss head screws that were attached to the front- and rear-mount rails in steps 3 and 4.

11.Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit into place. The unit should slide in and out of the rack easily.

WARNING: When sliding out the NVR5100, be careful not to let the unit fall out of the rack.

Figure 14. Mounting the NVR5100 into the Rack

18

C1621M-E (9/08)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Endura NVR5100 Series Page Contents List of Illustrations Regulatory Notices Video Quality CautionFeatures DescriptionInternal Video Models Optional AccessoriesModels DrivesParts List Before You BeginQty Description USER-SUPPLIED Parts Package Contents Shown Actual Size Integration and Application Scenario VLAN3Equipment Placement and Rack Mounting Product Serial Number Label PlacementUnpacking the NVR5100 Desktop Installation To install the NVR5100 on a desktopTo install the NVR5100 in a rack Rack MountingAssembling a Support Rail Repeat for the other rail set Attaching Support Rails Attaching Rack Rail Spacers Repeat for the second spacer Tightening the Thumbscrews Hard Drive Array Installation Installing Hard Drive CarriersHard Disk Drive Carrier Installation C1621M-E 9/08 Connecting Power ConnectionsConnecting to the Network Primary network connectorSecondary network connector Operation Front Panel Controls and IndicatorsPower button Drive statusNetwork activity Unit StartupReserved CPU activity Network statusUnit Shutdown You can shut down the NVR5100 in either of two waysTroubleshooting Power SupplyProblem Possible Causes Suggested Remedy Specifications SystemPhysical Appendices Appendix a Expanding Video StorageInstalling Multiple SEB5100 Units Switch Installing Additional SEB5100 Units Existing Switch Appendix B Replacing a Hard DriveDrive Number Label Appendix C Replacing a Power Supply Pull HandleCord Receptacle Appendix D Installing AN Uninterruptible Power Supply UPS Connecting a UPS to an NVR5100C1621M-E 9/08 Product Warranty and Return Information ISO9001

C1621M-E (9/08) 3 specifications

The Pelco C1621M-E (9/08) is a highly regarded camera in the field of surveillance technology, designed to deliver high-quality video performance in various environments. With its blend of advanced features and robust characteristics, the C1621M-E stands as an exemplary choice for security professionals who demand reliability and efficiency.

One of the standout features of the C1621M-E is its exceptional imaging capabilities. The camera is equipped with a high-resolution sensor that delivers clear and detailed images, even in low-light conditions. This functionality is enhanced by its advanced digital noise reduction technology, which minimizes graininess and delivers sharp, color-accurate video in various lighting scenarios.

In terms of installation flexibility, the C1621M-E offers versatile mounting options. It is designed to be easily integrated into various surveillance setups, whether it is for indoor or outdoor applications. The camera supports a wide range of lens options that allow users to customize the field of view according to specific monitoring requirements. This adaptability makes it suitable for a variety of uses, from monitoring retail environments to securing large outdoor areas.

Connectivity is also a crucial aspect of the C1621M-E. The camera supports both analog and digital video outputs, making it compatible with a broad range of recording devices and security systems. This ensures seamless integration with existing infrastructure, providing users with a straightforward experience when upgrading their surveillance systems.

Moreover, the C1621M-E incorporates intelligent video analytics capabilities that enhance its functionality. These features include motion detection and event recording, enabling users to respond swiftly to potential security threats. The ability to set up custom alerts further empowers users to maintain effective oversight within their premises.

Lastly, the rugged design of the C1621M-E ensures longevity and protection from environmental factors. Its durable housing is built to withstand harsh conditions, which is crucial for outdoor installations.

In summary, the Pelco C1621M-E (9/08) is a significant asset in the realm of security cameras, offering high-resolution imaging, flexible installation options, comprehensive connectivity, intelligent analytics, and a robust design. This camera is a reliable choice for professionals seeking to enhance their surveillance capabilities.
Top Page Image Contents