Pelco C1621M-E (9/08) 3 manual Rack Mounting, To install the NVR5100 in a rack

Page 15

RACK MOUNTING

The NVR5100 mounts into an industry-standard 19-inch (48 cm) equipment rack. The NVR5100 occupies three rack units (5.25 in. or 13.3 cm) of vertical rack space. The hardware necessary to mount the NVR5100 into a rack is supplied with the unit.

The rack must meet the following requirements:

•19-inch (48 cm) EIA-310-D compliant (rear column required)

•Rack column depth: 24 to 30 inches (61 to 76 cm)

•Column mounting hole provisions: 10-32 UNF-2B threaded holes or square window holes on front and rear columns

•Door systems are acceptable. Front doors must have at least 2 inches (5.1 cm) between the NVR5100 front bezel and the inside of the door. Rear doors may only be used on rack columns that are more than 26 inches (66 cm) deep.

WARNINGS:

•Secure the front and rear screws to the support rails.

•Make sure the NVR5100 is level.

•Slots and openings in the cabinet provide ventilation to prevent the unit from overheating. Do not block these openings. Never place the unit near or over a radiator or heat register. When placing the unit in a rack, be sure to provide proper ventilation.

To install the NVR5100 in a rack:

NOTE: Figure 4 identifies each piece of hardware for this procedure.

1.If chassis mounting brackets are not attached: Attach one mounting bracket to each side of the NVR5100. Use six 10-32 x 0.25-inch Phillips pan head screws for each bracket. Attach the brackets so that the tapered ends are positioned toward the rear of the NVR5100.

ATTACH BRACKETS

(6) SCREWS

10-32 X 0.25-INCH PHILLIPS PAN HEAD

Figure 9. Fastening Mounting Brackets to Chassis

C1621M-E (9/08)

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Endura NVR5100 Series Page Contents List of Illustrations Video Quality Caution Regulatory NoticesDescription FeaturesDrives Optional AccessoriesModels Internal Video ModelsParts List Before You BeginQty Description USER-SUPPLIED Parts Package Contents Shown Actual Size VLAN3 Integration and Application ScenarioEquipment Placement and Rack Mounting Product Serial Number Label PlacementUnpacking the NVR5100 To install the NVR5100 on a desktop Desktop InstallationRack Mounting To install the NVR5100 in a rackAssembling a Support Rail Repeat for the other rail set Attaching Support Rails Attaching Rack Rail Spacers Repeat for the second spacer Tightening the Thumbscrews Installing Hard Drive Carriers Hard Drive Array InstallationHard Disk Drive Carrier Installation C1621M-E 9/08 Connections Connecting PowerConnecting to the Network Primary network connectorSecondary network connector Drive status Front Panel Controls and IndicatorsPower button OperationNetwork status Unit StartupReserved CPU activity Network activityYou can shut down the NVR5100 in either of two ways Unit ShutdownTroubleshooting Power SupplyProblem Possible Causes Suggested Remedy System SpecificationsPhysical Appendix a Expanding Video Storage AppendicesInstalling Multiple SEB5100 Units Switch Appendix B Replacing a Hard Drive Installing Additional SEB5100 Units Existing SwitchDrive Number Label Pull Handle Appendix C Replacing a Power SupplyCord Receptacle Connecting a UPS to an NVR5100 Appendix D Installing AN Uninterruptible Power Supply UPSC1621M-E 9/08 Product Warranty and Return Information ISO9001

C1621M-E (9/08) 3 specifications

The Pelco C1621M-E (9/08) is a highly regarded camera in the field of surveillance technology, designed to deliver high-quality video performance in various environments. With its blend of advanced features and robust characteristics, the C1621M-E stands as an exemplary choice for security professionals who demand reliability and efficiency.

One of the standout features of the C1621M-E is its exceptional imaging capabilities. The camera is equipped with a high-resolution sensor that delivers clear and detailed images, even in low-light conditions. This functionality is enhanced by its advanced digital noise reduction technology, which minimizes graininess and delivers sharp, color-accurate video in various lighting scenarios.

In terms of installation flexibility, the C1621M-E offers versatile mounting options. It is designed to be easily integrated into various surveillance setups, whether it is for indoor or outdoor applications. The camera supports a wide range of lens options that allow users to customize the field of view according to specific monitoring requirements. This adaptability makes it suitable for a variety of uses, from monitoring retail environments to securing large outdoor areas.

Connectivity is also a crucial aspect of the C1621M-E. The camera supports both analog and digital video outputs, making it compatible with a broad range of recording devices and security systems. This ensures seamless integration with existing infrastructure, providing users with a straightforward experience when upgrading their surveillance systems.

Moreover, the C1621M-E incorporates intelligent video analytics capabilities that enhance its functionality. These features include motion detection and event recording, enabling users to respond swiftly to potential security threats. The ability to set up custom alerts further empowers users to maintain effective oversight within their premises.

Lastly, the rugged design of the C1621M-E ensures longevity and protection from environmental factors. Its durable housing is built to withstand harsh conditions, which is crucial for outdoor installations.

In summary, the Pelco C1621M-E (9/08) is a significant asset in the realm of security cameras, offering high-resolution imaging, flexible installation options, comprehensive connectivity, intelligent analytics, and a robust design. This camera is a reliable choice for professionals seeking to enhance their surveillance capabilities.
Top Page Image Contents