Pelco C1621M-E (9/08) 3 manual Appendix B Replacing a Hard Drive

Page 33

INSTALLING ADDITIONAL SEB5100 UNITS (EXISTING SWITCH)

To add an SEB5100 unit to an existing NVR5100 with a Gigabit Ethernet switch:

1.Connect one end of a UTP cable to a free RJ-45 port on the switch. Use a standard Cat5e or better UTP cable with RJ-45 connectors.

2.Connect the other end of the UTP cable to the network connector on the rear panel of the new SEB5100.

NOTE: Do not connect the UTP cable to the reserved connector on the SEB5100.

3.Power up the new SEB5100 if necessary; refer to the SEB5100 Series Installation manual (C1622M) for more information.

The NVR5100 automatically recognizes the new SEB5100 unit within two minutes and puts it into service.

APPENDIX B: REPLACING A HARD DRIVE

Since the NVR5100 runs continuously, a hard drive may fail at some point. If this happens, the indicator for the failed drive glows red.

WARNING: If a hard drive fails, replace it as soon as possible to maintain system data redundancy.

NOTES:

•The HD5000 Series hard drive replacement kit includes a single hard drive carrier with a Pelco-certified hard drive. Using any other hard drive in the drive carrier voids the manufacturer’s warranty for the NVR5100.

•You can replace the failed hard drive with a drive of equal or greater capacity. The unit ignores any additional capacity. However, do not install a lower capacity drive, which will corrupt the RAID array.

•You can replace the failed drive without shutting down the unit.

•No tools are required to replace this component.

To replace a hard drive:

1.Review all instructions in this section before proceeding.

2.Make sure you protect the unit and its components, which are susceptible to damage from improper handling and ESD. Refer to the Safe Handling of Hard Drives document (C2668M) for more information.

3.Unlock and open the front bezel.

4.Identify the failed hard drive. The drive status indicator will be solid red.

5.Squeeze both plastic finger tabs of the carrier’s spring-loaded latch.

DRIVE STATUS INDICATOR

Figure 27. Operating the Latching Mechanism

C1621M-E (9/08)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Endura NVR5100 Series Page Contents List of Illustrations Video Quality Caution Regulatory NoticesDescription FeaturesModels Optional AccessoriesInternal Video Models DrivesParts List Before You BeginQty Description USER-SUPPLIED Parts Package Contents Shown Actual Size VLAN3 Integration and Application ScenarioEquipment Placement and Rack Mounting Product Serial Number Label PlacementUnpacking the NVR5100 To install the NVR5100 on a desktop Desktop InstallationRack Mounting To install the NVR5100 in a rackAssembling a Support Rail Repeat for the other rail set Attaching Support Rails Attaching Rack Rail Spacers Repeat for the second spacer Tightening the Thumbscrews Installing Hard Drive Carriers Hard Drive Array InstallationHard Disk Drive Carrier Installation C1621M-E 9/08 Connections Connecting PowerConnecting to the Network Primary network connectorSecondary network connector Power button Front Panel Controls and IndicatorsOperation Drive statusReserved CPU activity Unit StartupNetwork activity Network statusYou can shut down the NVR5100 in either of two ways Unit ShutdownTroubleshooting Power SupplyProblem Possible Causes Suggested Remedy System SpecificationsPhysical Appendix a Expanding Video Storage AppendicesInstalling Multiple SEB5100 Units Switch Appendix B Replacing a Hard Drive Installing Additional SEB5100 Units Existing SwitchDrive Number Label Pull Handle Appendix C Replacing a Power SupplyCord Receptacle Connecting a UPS to an NVR5100 Appendix D Installing AN Uninterruptible Power Supply UPSC1621M-E 9/08 Product Warranty and Return Information ISO9001

C1621M-E (9/08) 3 specifications

The Pelco C1621M-E (9/08) is a highly regarded camera in the field of surveillance technology, designed to deliver high-quality video performance in various environments. With its blend of advanced features and robust characteristics, the C1621M-E stands as an exemplary choice for security professionals who demand reliability and efficiency.

One of the standout features of the C1621M-E is its exceptional imaging capabilities. The camera is equipped with a high-resolution sensor that delivers clear and detailed images, even in low-light conditions. This functionality is enhanced by its advanced digital noise reduction technology, which minimizes graininess and delivers sharp, color-accurate video in various lighting scenarios.

In terms of installation flexibility, the C1621M-E offers versatile mounting options. It is designed to be easily integrated into various surveillance setups, whether it is for indoor or outdoor applications. The camera supports a wide range of lens options that allow users to customize the field of view according to specific monitoring requirements. This adaptability makes it suitable for a variety of uses, from monitoring retail environments to securing large outdoor areas.

Connectivity is also a crucial aspect of the C1621M-E. The camera supports both analog and digital video outputs, making it compatible with a broad range of recording devices and security systems. This ensures seamless integration with existing infrastructure, providing users with a straightforward experience when upgrading their surveillance systems.

Moreover, the C1621M-E incorporates intelligent video analytics capabilities that enhance its functionality. These features include motion detection and event recording, enabling users to respond swiftly to potential security threats. The ability to set up custom alerts further empowers users to maintain effective oversight within their premises.

Lastly, the rugged design of the C1621M-E ensures longevity and protection from environmental factors. Its durable housing is built to withstand harsh conditions, which is crucial for outdoor installations.

In summary, the Pelco C1621M-E (9/08) is a significant asset in the realm of security cameras, offering high-resolution imaging, flexible installation options, comprehensive connectivity, intelligent analytics, and a robust design. This camera is a reliable choice for professionals seeking to enhance their surveillance capabilities.
Top Page Image Contents