Pelco C1621M-E (9/08) 3 manual Appendix C Replacing a Power Supply, Pull Handle

Page 35

APPENDIX C: REPLACING A POWER SUPPLY

The NVR5100 incorporates two independent, hot-swappable power supplies. Each power supply acts as a redundant alternate for the other. This level of fault tolerance ensures that the NVR5100 is capable of sustaining uninterruptible operation, even if one power supply fails. If a power supply does fail, the hot-swap feature simplifies replacement without shutting down the unit or interrupting normal operation.

WARNING: If a power supply fails, replace it immediately. Operating the unit with only one active power supply eliminates the system’s fault tolerance.

Monitor the power supply indicators regularly to make sure that both power supplies are operating correctly. Check the following items:

•The front panel unit status indicator is not red.

•The green indicator for each power supply is lit. If the indicator is red, the power supply must be replaced.

•Both fans in each power supply are operating.

NOTES:

•You can replace one failed power supply without shutting down the unit.

•No tools are required to replace this component.

To replace a power supply:

1.Review all instructions in this section before proceeding.

2.Identify the failed power supply. The status indicator will be red or not lit.

3.Unplug the power cord from the failed power supply as follows:

WARNING: For safety, you must unplug the power cord from the wall socket or other power source before unplugging it from the failed power supply on the unit.

a.Unplug the power cord for the failed power supply from the power source.

b.Unplug the power cord from the failed power supply at the rear panel of the unit.

4.Using your thumb, lift the power supply latch while holding the pull handle.

PULL HANDLE

 

 

 

 

Text

 

 

 

REV

Sample

 

 

 

VOLTS

Text

 

-

 

 

Model

0020

 

 

Sample

39

 

 

 

-

 

 

 

 

03267

 

 

Text

 

 

 

AMPS

 

 

 

Sample

 

MODEL

SN

FREQ

50/60HZ

Audio/VideoApparatus

USA

IN

MADE

CA

CLOVIS,

PELCO,

BY

MFG

91KK

POWER POWER

SUPPLY SUPPLY

LATCH STATUS

INDICATOR

Figure 30. Releasing the Power Supply Latching Mechanism

C1621M-E (9/08)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Endura NVR5100 Series Page Contents List of Illustrations Video Quality Caution Regulatory NoticesDescription FeaturesDrives Optional AccessoriesModels Internal Video ModelsQty Description Parts ListBefore You Begin USER-SUPPLIED Parts Package Contents Shown Actual Size VLAN3 Integration and Application ScenarioUnpacking the NVR5100 Equipment Placement and Rack MountingProduct Serial Number Label Placement To install the NVR5100 on a desktop Desktop InstallationRack Mounting To install the NVR5100 in a rackAssembling a Support Rail Repeat for the other rail set Attaching Support Rails Attaching Rack Rail Spacers Repeat for the second spacer Tightening the Thumbscrews Installing Hard Drive Carriers Hard Drive Array InstallationHard Disk Drive Carrier Installation C1621M-E 9/08 Connections Connecting PowerSecondary network connector Connecting to the NetworkPrimary network connector Drive status Front Panel Controls and IndicatorsPower button OperationNetwork status Unit StartupReserved CPU activity Network activityYou can shut down the NVR5100 in either of two ways Unit ShutdownProblem Possible Causes Suggested Remedy TroubleshootingPower Supply System SpecificationsPhysical Appendix a Expanding Video Storage AppendicesInstalling Multiple SEB5100 Units Switch Appendix B Replacing a Hard Drive Installing Additional SEB5100 Units Existing SwitchDrive Number Label Pull Handle Appendix C Replacing a Power SupplyCord Receptacle Connecting a UPS to an NVR5100 Appendix D Installing AN Uninterruptible Power Supply UPSC1621M-E 9/08 Product Warranty and Return Information ISO9001

C1621M-E (9/08) 3 specifications

The Pelco C1621M-E (9/08) is a highly regarded camera in the field of surveillance technology, designed to deliver high-quality video performance in various environments. With its blend of advanced features and robust characteristics, the C1621M-E stands as an exemplary choice for security professionals who demand reliability and efficiency.

One of the standout features of the C1621M-E is its exceptional imaging capabilities. The camera is equipped with a high-resolution sensor that delivers clear and detailed images, even in low-light conditions. This functionality is enhanced by its advanced digital noise reduction technology, which minimizes graininess and delivers sharp, color-accurate video in various lighting scenarios.

In terms of installation flexibility, the C1621M-E offers versatile mounting options. It is designed to be easily integrated into various surveillance setups, whether it is for indoor or outdoor applications. The camera supports a wide range of lens options that allow users to customize the field of view according to specific monitoring requirements. This adaptability makes it suitable for a variety of uses, from monitoring retail environments to securing large outdoor areas.

Connectivity is also a crucial aspect of the C1621M-E. The camera supports both analog and digital video outputs, making it compatible with a broad range of recording devices and security systems. This ensures seamless integration with existing infrastructure, providing users with a straightforward experience when upgrading their surveillance systems.

Moreover, the C1621M-E incorporates intelligent video analytics capabilities that enhance its functionality. These features include motion detection and event recording, enabling users to respond swiftly to potential security threats. The ability to set up custom alerts further empowers users to maintain effective oversight within their premises.

Lastly, the rugged design of the C1621M-E ensures longevity and protection from environmental factors. Its durable housing is built to withstand harsh conditions, which is crucial for outdoor installations.

In summary, the Pelco C1621M-E (9/08) is a significant asset in the realm of security cameras, offering high-resolution imaging, flexible installation options, comprehensive connectivity, intelligent analytics, and a robust design. This camera is a reliable choice for professionals seeking to enhance their surveillance capabilities.
Top Page Image Contents