Pelco C3468M manual Pendant

Page 40

PENDANT

Construction

 

Back Box

Aluminum

Dome Drive

Aluminum, thermoplastic

Lower Dome

Acrylic

Cable Entry (Back Box)

Through 1.5-inch NPT pendant mount

Pan Movement

360° continuous pan rotation

Vertical Tilt

Unobstructed +2° to –92°

Manual Pan/Tilt Speeds*

 

Pan

0.1° to 80°/sec manual operation, 150°/sec turbo

Tilt

0.1° to 40°/sec manual operation

Preset Speeds

 

Pan

400°/sec

Tilt

200°/sec

Environment

Indoor/outdoor

Operating Temperature

 

Standard Pendant

(Assumes no wind chill factor)

Maximum

140°F (60°C) absolute maximum in shade; 122°F (50°C) sustained

 

maximum in shade; 113°F (45°C) absolute maximum in direct

 

sunlight; 95°F (35°C) sustained maximum in direct sunlight

Minimum

25°F (–4°C) sustained minimum

Environmental Pendant

(Assumes no wind chill factor)

Maximum

140°F (60°C) absolute maximum; 122°F (50°C) sustained

 

maximum

Minimum

–60°F (–51.1°C) absolute minimum; prevents icing at sustained

 

minimum of –50°F (–45°C); de-ices 0.1 inch (2.5 mm) within

 

3 hours after power-up

Weight (approximate)

 

Back Box

 

Standard Pendant

2.40 lb (1.09 kg)

Environmental Pendant

3.50 lb (1.59 kg)

Dome Drive

3.30 lb (1.48 kg)

Lower Dome

0.20 lb (0.09 kg)

*For variable-speed operation, an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has configurable fixed speeds.

40

C3468M (4/10)

Image 40
Contents Spectra IV IP Series SD4E Dome System Page Contents List of Illustrations List of Tables Important Notices Legal NoticeRegulatory Notices Open Source Software NoticeDescription Parts ListModels Mounting IN-CEILINGPrepare the ceiling refer to Figure Cut out the circleHEAVY-DUTY IN-CEILING Tighten the screws until you hear a clicking noisePrepare the ceiling refer to on Prepare the holesInstalling the Heavy-Duty In-Ceiling Back Box PENDANT, HEAVY-DUTY PENDANT, and Stainless Steel Attaching the Pendant Back Box to the MountWiring Back Box DoorBack Box Circuit Board Connect the Wiring to the Circuit Board Microphone Line-Out Audio Twisted Pair Cable Amplifier Line-In Audio Twisted Pair Cable SpeakerClose the interconnect door and snap the tab lock into place Table A. Video Coaxial Cable Requirements Cable requirements Ohm impedance All-copper center conductorInstalling the Dome Drive Installing the Lower Dome HEAVY-DUTY IN-CEILING Pendant Attach the back box leash to the lower dome refer to FigureHEAVY-DUTY Pendant Attach the back box leash to the lower dome refer to onC3468M 4/10 Stainless Steel Installing the Stainless Steel Lower Dome Troubleshooting Table C. Troubleshooting the Spectra IV IP Dome System 2 Lower the speaker volumeHave built-in echo Cancellation Audio is received Too highSwitch Settings Table E. Switch Settings for SW1, Pelco P-Type Control Switch SettingTable F. Switch Settings for SW1, Pelco D-Type Control Switch Setting Switch Setting Switch Setting Switch Setting Switch Setting 243 244 245 246 247 248 249 250 251 252 253 254 Electrical SpecificationsAudio IN-CEILING Hours after power-upMinimum HEAVY-DUTY IN-CEILING Pendant HEAVY-DUTY Pendant Power-up Stainless SteelConstruction Back Box Dome Drive Aluminum, thermoplastic Lower Dome Trim RingProduct Warranty and Return Information

C3468M specifications

The Pelco C3468M is a sophisticated surveillance camera designed to meet the growing demands of modern security applications. Known for its exceptional image quality and advanced technologies, this camera is an ideal choice for both indoor and outdoor environments.

One of the main features of the C3468M is its high-definition resolution. It delivers stunning 4MP video quality, ensuring that every detail is captured with precision. This clarity becomes invaluable in critical situations where identifying faces or license plates is essential. The camera utilizes advanced imaging technologies, such as Wide Dynamic Range (WDR), which helps balance lighting conditions in complex environments. This means it can effectively capture scenes with both bright and dark areas, making it suitable for diverse lighting situations.

Another notable characteristic of the C3468M is its innovative low-light performance. The camera is equipped with a high-sensitivity sensor, allowing it to produce clear images even in challenging low-light conditions. This is particularly important for surveillance during nighttime or in dimly lit areas, providing round-the-clock monitoring without compromising image clarity.

The C3468M also boasts robust environmental resilience. With an IP66 rating, this camera is protected against dust and water, making it suitable for outdoor applications in various weather conditions. Additionally, it features an IK10 rating for impact resistance, ensuring that it can withstand physical impact and tampering, which is essential for maintaining security in vulnerable locations.

Moreover, the C3468M incorporates advanced video analytics capabilities. Features such as motion detection, tampering detection, and line crossing can be configured to trigger alerts, enhancing situational awareness. These smart capabilities help security personnel respond more effectively to incidents, streamlining vigilance efforts.

The camera is user-friendly, with seamless integration into existing security systems. It supports various connectivity options, including IP networking, allowing for flexible installation and remote access for monitoring. The Pelco C3468M highlights a commitment to security innovation, providing professionals with the tools needed to create safer environments. With its blend of high-performance features and cutting-edge technology, this camera is a reliable choice for comprehensive surveillance solutions.