Pelco C3468M manual Product Warranty and Return Information

Page 43

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

•Five years:

–Fiber optic products

–Unshielded Twisted Pair (UTP) transmission products

–CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models

•Three years:

–Pelco-designed fixed network cameras and network dome cameras with Sarix™ technology.

–Pelco-branded fixed camera models (CCC1390H Series, C10DN Series, C10CH Series, and IP3701H Series)

–EH1500 Series enclosures

–Spectra® IV products (including Spectra IV IP)

–Camclosure® Series (IS, ICS, IP) integrated camera systems

–DX Series digital video recorders (except DX9000 Series which is covered for a period of one year), DVR5100 Series digital video recorders, Digital Sentry® Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders

–Endura® Series distributed network-based video products

–Genex® Series products (multiplexers, server, and keyboard)

–PMCL200/300/400 Series LCD monitors

–PMCL5xx Series FHD monitors

•Two years:

–Standard varifocal, fixed focal, and motorized zoom lenses.

–DF5/DF8 Series fixed dome products

–Legacy® Series integrated positioning systems

–Spectra III™, Spectra Mini, Spectra Mini IP, Esprit®, ExSite®, and PS20 scanners, including when used in continuous motion applications.

–Esprit Ti and TI2500 Series thermal imaging products

–Esprit and WW5700 Series window wiper (excluding wiper blades).

–CM6700/CM6800/CM9700 Series matrix

–Digital Light Processing (DLP®) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty.

–Intelli-M®eIDC controllers

•One year:

–Video cassette recorders (VCRs), except video heads. Video heads will be covered for a period of six months.

•Six months:

–All pan and tilts, scanners, or preset lenses used in continuous motion applications (preset scan, tour, and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1.Model and serial number

2.Date of shipment, P.O. number, sales order number, or Pelco invoice number

3.Details of the defect or problem

If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

To expedite parts returned for repair or credit, please call Pelco at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair) and designated return location.

All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.

2-10-10

Pelco, the Pelco logo, Camclosure, Digital Sentry, Endura, Esprit, ExSite, Genex, Intelli-M, Legacy, and Spectra are registered trademarks of Pelco, Inc. Spectra III is a trademark of Pelco, Inc.

DLP is a registered trademark of Texas Instruments Incorporated.

All product names and services identified throughout this document are trademarks or registered trademarks of their respective companies. The absence of a trademark or registered trademark from this document does not constitute a waiver of intellectual property rights.

© Copyright 2010, Pelco, Inc. All rights reserved.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Spectra IV IP Series SD4E Dome System Page Contents List of Illustrations List of Tables Open Source Software Notice Important NoticesLegal Notice Regulatory NoticesDescription Parts ListModels Cut out the circle MountingIN-CEILING Prepare the ceiling refer to FigurePrepare the holes HEAVY-DUTY IN-CEILINGTighten the screws until you hear a clicking noise Prepare the ceiling refer to onInstalling the Heavy-Duty In-Ceiling Back Box Attaching the Pendant Back Box to the Mount PENDANT, HEAVY-DUTY PENDANT, and Stainless SteelBack Box Door WiringBack Box Circuit Board Connect the Wiring to the Circuit Board Line-In Audio Twisted Pair Cable Speaker Microphone Line-Out Audio Twisted Pair Cable AmplifierClose the interconnect door and snap the tab lock into place Cable requirements Ohm impedance All-copper center conductor Table A. Video Coaxial Cable RequirementsInstalling the Dome Drive Installing the Lower Dome HEAVY-DUTY IN-CEILING Attach the back box leash to the lower dome refer to Figure PendantAttach the back box leash to the lower dome refer to on HEAVY-DUTY PendantC3468M 4/10 Stainless Steel Installing the Stainless Steel Lower Dome Troubleshooting Audio is received Too high Table C. Troubleshooting the Spectra IV IP Dome System 2Lower the speaker volume Have built-in echo CancellationSwitch Settings Switch Setting Table E. Switch Settings for SW1, Pelco P-Type ControlTable F. Switch Settings for SW1, Pelco D-Type Control Switch Setting Switch Setting Switch Setting Switch Setting Switch Setting 243 244 245 246 247 248 249 250 251 252 253 254 Electrical SpecificationsAudio IN-CEILING Hours after power-upMinimum HEAVY-DUTY IN-CEILING Pendant HEAVY-DUTY Pendant Dome Drive Aluminum, thermoplastic Lower Dome Trim Ring Power-upStainless Steel Construction Back BoxProduct Warranty and Return Information

C3468M specifications

The Pelco C3468M is a sophisticated surveillance camera designed to meet the growing demands of modern security applications. Known for its exceptional image quality and advanced technologies, this camera is an ideal choice for both indoor and outdoor environments.

One of the main features of the C3468M is its high-definition resolution. It delivers stunning 4MP video quality, ensuring that every detail is captured with precision. This clarity becomes invaluable in critical situations where identifying faces or license plates is essential. The camera utilizes advanced imaging technologies, such as Wide Dynamic Range (WDR), which helps balance lighting conditions in complex environments. This means it can effectively capture scenes with both bright and dark areas, making it suitable for diverse lighting situations.

Another notable characteristic of the C3468M is its innovative low-light performance. The camera is equipped with a high-sensitivity sensor, allowing it to produce clear images even in challenging low-light conditions. This is particularly important for surveillance during nighttime or in dimly lit areas, providing round-the-clock monitoring without compromising image clarity.

The C3468M also boasts robust environmental resilience. With an IP66 rating, this camera is protected against dust and water, making it suitable for outdoor applications in various weather conditions. Additionally, it features an IK10 rating for impact resistance, ensuring that it can withstand physical impact and tampering, which is essential for maintaining security in vulnerable locations.

Moreover, the C3468M incorporates advanced video analytics capabilities. Features such as motion detection, tampering detection, and line crossing can be configured to trigger alerts, enhancing situational awareness. These smart capabilities help security personnel respond more effectively to incidents, streamlining vigilance efforts.

The camera is user-friendly, with seamless integration into existing security systems. It supports various connectivity options, including IP networking, allowing for flexible installation and remote access for monitoring. The Pelco C3468M highlights a commitment to security innovation, providing professionals with the tools needed to create safer environments. With its blend of high-performance features and cutting-edge technology, this camera is a reliable choice for comprehensive surveillance solutions.
Top Page Image Contents