Pelco ES30PC, ES31PC Operation, POWER-UP Display, HOW to Operate Your System, Operating Notes

Page 14

Operation

POWER-UP DISPLAY

When the system is powered up, the selected protocol, revision number, and other information is displayed on the monitor. For example, the screen might show the following information:

ESPRIT 16X IOC 2.00 CONFIGURE DONE

D Address 1

P Address 2

Comm 2400, N, 8, 1

The information displayed depends on the selected protocol (C, D, or P) and the menu selection for power-up mode. (Refer to the Power-up Mode in the Programming section).

The information remains on the monitor until the system is moved.

CAMERA xxxx - xxxx

HOW TO OPERATE YOUR SYSTEM

Operation

How to Control

 

 

Pan and Tilt

Move joystick left/right and up/down.

 

 

Scanning

 

Stop scan

Call preset 96.

Random scan

Call preset 97.

Frame scan

Call preset 98.

Auto scan

Call preset 99.

 

 

Zoom Far

To zoom far, do the following:

 

1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom1 limit.

 

2. Release the button or joystick.

 

3. To continuing zooming (digitally), immediately press the button or turn the joystick clockwise again until you

 

have the picture you want or reach the digital zoom2 limit.

 

 

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

 

 

Presets

Refer to the documentation supplied with the controller.

 

 

Patterns

Refer to the documentation supplied with the controller.

 

 

1Optical zoom magnifies the image and the picture remains clear. Resolution is constant.

2Digital zoom magnifies the image and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.

OPERATING NOTES

ENVIRONMENTAL RANGE

The operating temperature ranges from a minimum of -50°F (-45°C) to a maximum of 122°F (50°C) for sustained system operation or 140°F (60°C) absolute maximum. The entire unit can de-ice and be operational in two hours from a temperature of -13°F (-25°C). The thermostatically controlled heater consumes 10 watts and cycles on at 61°F (16°C) and off at 81°F (27°C), while the window defroster runs continuously and consumes 2.5 watts.

14

C311M-N (6/06)

Image 14
Contents ES30PC/ES31PC Esprit with Pressurized IOC Page Contents List of Tables Important Safety Instructions Regulatory Notices Radio and Television InterferenceModel Format Pedestal Mount Wall Mount DescriptionModels Installation ES30 ES31120/230 VAC 24 VACAUX2 Schematic Drawing C311M-N 6/06 HOW to Reinstall the PAN and Tilt Cover TXB Series Translator Board Installation OptionalHOW to Remove the PAN and Tilt Cover TOP Gasket Front Rain Guard Operation POWER-UP DisplayHOW to Operate Your System Operating NotesPressurized Integrated Optics Cartridge Current Reading Menu Controller Pan TiltZones Iris Close Cancel Programming ES30PC16/ES31PC16Programming ES30PC22/ES31PC22 Programming ES30PCBW24/ES31PCBW24 Accessing Main Menu Preset ProgrammingWS5050 KBD4000/KBD4002/KBD4000VMPT9500 VCD5000ACK ACT Acknowledge Action Main MenuAlert Display Position Alert Repeat Auto Focus Mode Auto Iris Auto IR Level Models ES30PCBW24/ES31PCBW24 Auto Sharpness AZ/EL AZ/EL Line Azimuth Zero Backlight Compensation There are two backlight compensation modesDirection Direction Line Display Duration GAIN/AGC Gain LimitIR Filter Mode Models ES30PCBW24/ES31PCBW24 Presets Limit StopsLimit Stops Menu Clear Manual StopsClear Scan Limit Stops Line Synchronization 2 second 8 second Park Time Minutes Pattern Length POWER-UP Mode Proportional PAN Reset Camera Scan Speed Sharpness Shutter Speed Speed Profile White Balance Wiper Mode Zones Zone BlankZoom Zoom Limit Zoom Line Troubleshooting Symptom Problem Maintenance WiperPressurized IOC Removing the IOCAppendix Switch SettingSwitch Setting SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 Table B. Switch Settings for SW2 112 234 Specifications ElectricalFocus Product Warranty and Return Information ISO9001

ES31PC, ES30PC specifications

The Pelco ES31PC and ES30PC are part of Pelco's advanced camera series, designed specifically for security and surveillance applications. These models incorporate state-of-the-art technology to ensure high-quality video performance, versatility, and reliability.

The ES31PC is equipped with a 1/2.8-inch sensor that delivers exceptional image quality, even in low-light conditions. With its ability to capture video in full HD resolution at 1080p, this model assures clarity and detail essential for risk management and security monitoring. The advanced low-light technology enables this camera to perform effectively with minimal illumination, ensuring that critical moments are captured regardless of lighting conditions.

On the other hand, the ES30PC utilizes a similar sensor but emphasizes a compact and lightweight design, making it ideal for discreet installations. This camera also supports full HD video resolution and incorporates advanced image processing techniques to enhance video clarity and reduce noise, providing crisp images in various environments.

Both models feature H.264 and H.265 video encoding, which allows for efficient bandwidth management. This technology optimizes storage space without compromising video quality, making these cameras a cost-effective solution for longer recording times. The integration of Power over Ethernet (PoE) simplifies installation and reduces cable clutter by allowing both power and data to run over a single Ethernet cable.

In terms of connectivity, the Pelco ES31PC and ES30PC support multiple streaming capabilities, ensuring that users can access live feeds remotely via various devices. The built-in web interface provides easy configuration and management options, allowing users to customize settings according to their specific needs.

Additional features include motion detection, which triggers alerts and recording as soon as activity is detected, and a robust weather-resistant housing that allows for outdoor deployment in challenging environments. This combination of durability and high performance ensures that the ES31PC and ES30PC are suitable for a wide range of applications, from retail and commercial spaces to critical infrastructure.

In summary, the Pelco ES31PC and ES30PC surveillance cameras stand out for their superior technology, comprehensive features, and adaptability. These models provide exceptional image quality, efficient video encoding, and user-friendly management, making them reliable options for contemporary surveillance needs.