Pelco ES30PC, ES31PC manual Current Reading Menu, Controller Pan Tilt

Page 16

CURRENT READING MENU

IOC Internal Reading

Temperature

37 C

 

98 F

Dewpoint

08 C

 

46 F

Pressure

10.30 psig

 

0.71 bar

Refresh

Exit

The Current Reading menu displays the existing status of temperature, pressure, and dewpoint inside the integrated optics cartridge. An asterisk displayed to the left of a menu item denotes that an alert condition exists.

Due to the heat emitted from the electronics of the camera, normal temperature operating range is approximately 95°F.

PAN AND TILT FUNCTIONS

Controller

Pan

Tilt

Type

(Capability: 360° Continuous Pan Rotation)**

(Viewing Range: +33° to -83°)***

 

 

 

Fixed speed

Speed determined by controller

Speed determined by controller

 

 

 

Variable speed*

0.1 to 40° per second, depending on joystick and zoom

0.1 to 20° per second, depending on joystick and zoom

 

positions

positions

Turbo Mode*

100° per second

Does not affect the tilt speed

Preset Mode*

100° per second

30° per second

 

 

 

*50 mph wind speed profile.

**If manual limit stops are set, “Pan Limit” appears on your monitor when a limit stop is reached (except when you are programming or running a pattern). This does not apply to scan limit stops.

***When the system reaches the upper limit, “Tilt Limit” appears on your monitor (except when you are programming or running a pattern).

If the proportional pan mode is enabled (refer to Proportional Pan in the Programming section), the pan and tilt speeds will depend on the amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings. This keeps the image from moving too fast on the monitor when there is a large amount of zoom. This slowing does not happen when going to a preset, but does occur in turbo mode when high zoom is selected. The minimum pan and tilt speeds are 0.1 degree per second at full zoom.

SCAN SPEED

Scan speed is adjustable from 1 to 40 degrees per second through the programming menu.

PRESET FUNCTIONS

The Esprit system is capable of going to 64 preset locations, each with a 20-character label. The presets are numbered 1-32 and 35-66. Refer to the documentation for your control system for programming presets.

If you command the pan and tilt to go to an undefined preset, erratic operation may result.

Presets 33 and 34 are fixed commands, meaning that you cannot program them. Preset 33 is the “flip” command, which will pan the system 180 degrees. Preset 34 is the “pan zero” command, which will pan the system to the factory-determined zero reference point.

RANDOM, FRAME, AND AUTO SCANNING

Select preset 97 (30) to start random scanning. Select preset 98 (31) to activate frame scanning (three seconds of scanning followed by a three- second pause). Select preset 99 (32) to start auto (continuous) scanning. Scan limit stops are controlled by software. Refer to the Limit Stops section to program the scan limit stops.

When the pan and tilt reaches a scan limit stop, it reverses direction. Select preset 96 (29) to stop a scan. Any pan and tilt or lens command will also stop a scan.

16

C311M-N (6/06)

Image 16
Contents ES30PC/ES31PC Esprit with Pressurized IOC Page Contents List of Tables Important Safety Instructions Regulatory Notices Radio and Television InterferenceModels DescriptionModel Format Pedestal Mount Wall Mount Installation ES30 ES31120/230 VAC 24 VACAUX2 Schematic Drawing C311M-N 6/06 HOW to Remove the PAN and Tilt Cover TXB Series Translator Board Installation OptionalHOW to Reinstall the PAN and Tilt Cover TOP Gasket Front Rain Guard POWER-UP Display HOW to Operate Your SystemOperation Operating NotesPressurized Integrated Optics Cartridge Current Reading Menu Controller Pan TiltZones Iris Close Cancel Programming ES30PC16/ES31PC16Programming ES30PC22/ES31PC22 Programming ES30PCBW24/ES31PCBW24 Accessing Main Menu Preset ProgrammingKBD4000/KBD4002/KBD4000V MPT9500WS5050 VCD5000ACK ACT Acknowledge Action Main MenuAlert Display Position Alert Repeat Auto Focus Mode Auto Iris Auto IR Level Models ES30PCBW24/ES31PCBW24 Auto Sharpness AZ/EL AZ/EL Line Azimuth Zero Backlight Compensation There are two backlight compensation modesDirection Direction Line Display Duration GAIN/AGC Gain LimitIR Filter Mode Models ES30PCBW24/ES31PCBW24 Presets Limit StopsLimit Stops Menu Clear Manual StopsClear Scan Limit Stops Line Synchronization 2 second 8 second Park Time Minutes Pattern Length POWER-UP Mode Proportional PAN Reset Camera Scan Speed Sharpness Shutter Speed Speed Profile White Balance Wiper Mode Zones Zone BlankZoom Zoom Limit Zoom Line Troubleshooting Symptom Problem Maintenance WiperPressurized IOC Removing the IOCSwitch Setting SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 Switch SettingAppendix Table B. Switch Settings for SW2 112 234 Specifications ElectricalFocus Product Warranty and Return Information ISO9001

ES31PC, ES30PC specifications

The Pelco ES31PC and ES30PC are part of Pelco's advanced camera series, designed specifically for security and surveillance applications. These models incorporate state-of-the-art technology to ensure high-quality video performance, versatility, and reliability.

The ES31PC is equipped with a 1/2.8-inch sensor that delivers exceptional image quality, even in low-light conditions. With its ability to capture video in full HD resolution at 1080p, this model assures clarity and detail essential for risk management and security monitoring. The advanced low-light technology enables this camera to perform effectively with minimal illumination, ensuring that critical moments are captured regardless of lighting conditions.

On the other hand, the ES30PC utilizes a similar sensor but emphasizes a compact and lightweight design, making it ideal for discreet installations. This camera also supports full HD video resolution and incorporates advanced image processing techniques to enhance video clarity and reduce noise, providing crisp images in various environments.

Both models feature H.264 and H.265 video encoding, which allows for efficient bandwidth management. This technology optimizes storage space without compromising video quality, making these cameras a cost-effective solution for longer recording times. The integration of Power over Ethernet (PoE) simplifies installation and reduces cable clutter by allowing both power and data to run over a single Ethernet cable.

In terms of connectivity, the Pelco ES31PC and ES30PC support multiple streaming capabilities, ensuring that users can access live feeds remotely via various devices. The built-in web interface provides easy configuration and management options, allowing users to customize settings according to their specific needs.

Additional features include motion detection, which triggers alerts and recording as soon as activity is detected, and a robust weather-resistant housing that allows for outdoor deployment in challenging environments. This combination of durability and high performance ensures that the ES31PC and ES30PC are suitable for a wide range of applications, from retail and commercial spaces to critical infrastructure.

In summary, the Pelco ES31PC and ES30PC surveillance cameras stand out for their superior technology, comprehensive features, and adaptability. These models provide exceptional image quality, efficient video encoding, and user-friendly management, making them reliable options for contemporary surveillance needs.