Pelco ES30PC, ES31PC manual AUX2 Schematic Drawing

Page 10

ESPRIT

AUX 2

ORANGE WIRE

AUX 2 COM

BLUE WIRE

AUX2 Schematic Drawing

USER

ACCESSORY

K1

OMRON G5V-1-DC12

D1

1N4005

AUX 2

AUX 2 COM

NOTE: CURRENT MUST NOT EXCEED 40 mA.

V1

32 VDC

7.Install mount; refer to the installation manual supplied with the mount for instructions.

8.Turn on the power. If the red LED lights, turn off the power and proceed to the next step. If the red LED does not light, refer to the Troubleshooting section.

9.Plug the male Esprit system connector, located on the bottom of the pan and tilt, into the female Esprit system connector located on the transformer module. Align the pan and tilt part number with the alignment label of the base and then attach the pan and tilt to the base with three 1/4-20 nuts and washers (supplied).

PART

NUMBER

MALE SYSTEM

CONNECTOR

FEMALE

SYSTEM

ALIGNMENTCONNECTOR

LABEL

10.Set the receiver address and system baud rate by configuring DIP switches SW1 and SW2.

NOTE: If you have a Coaxitron controller, you do not have to set the DIP switches. The Esprit will sense and automatically select settings from Coaxitron control signals in either standard or extended mode.

To set the DIP switches:

a.Remove the plug from the left cover of the pan and tilt. It is not necessary to remove the pan and tilt cover.

b.Set the baud rate (SW1) and receiver address (SW2). For switch settings refer to the labels located on top of the camera module or Tables A and B in the “Appendix” on page 63.

10

C311M-N (6/06)

Image 10
Contents ES30PC/ES31PC Esprit with Pressurized IOC Page Contents List of Tables Important Safety Instructions Regulatory Notices Radio and Television InterferenceModels DescriptionModel Format Pedestal Mount Wall Mount Installation ES30 ES31120/230 VAC 24 VACAUX2 Schematic Drawing C311M-N 6/06 HOW to Remove the PAN and Tilt Cover TXB Series Translator Board Installation OptionalHOW to Reinstall the PAN and Tilt Cover TOP Gasket Front Rain Guard Operation POWER-UP DisplayHOW to Operate Your System Operating NotesPressurized Integrated Optics Cartridge Current Reading Menu Controller Pan TiltZones Iris Close Cancel Programming ES30PC16/ES31PC16Programming ES30PC22/ES31PC22 Programming ES30PCBW24/ES31PCBW24 Accessing Main Menu Preset ProgrammingWS5050 KBD4000/KBD4002/KBD4000VMPT9500 VCD5000ACK ACT Acknowledge Action Main MenuAlert Display Position Alert Repeat Auto Focus Mode Auto Iris Auto IR Level Models ES30PCBW24/ES31PCBW24 Auto Sharpness AZ/EL AZ/EL Line Azimuth Zero Backlight Compensation There are two backlight compensation modesDirection Direction Line Display Duration GAIN/AGC Gain LimitIR Filter Mode Models ES30PCBW24/ES31PCBW24 Presets Limit StopsLimit Stops Menu Clear Manual StopsClear Scan Limit Stops Line Synchronization 2 second 8 second Park Time Minutes Pattern Length POWER-UP Mode Proportional PAN Reset Camera Scan Speed Sharpness Shutter Speed Speed Profile White Balance Wiper Mode Zones Zone BlankZoom Zoom Limit Zoom Line Troubleshooting Symptom Problem Maintenance WiperPressurized IOC Removing the IOCSwitch Setting SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 Switch SettingAppendix Table B. Switch Settings for SW2 112 234 Specifications ElectricalFocus Product Warranty and Return Information ISO9001

ES31PC, ES30PC specifications

The Pelco ES31PC and ES30PC are part of Pelco's advanced camera series, designed specifically for security and surveillance applications. These models incorporate state-of-the-art technology to ensure high-quality video performance, versatility, and reliability.

The ES31PC is equipped with a 1/2.8-inch sensor that delivers exceptional image quality, even in low-light conditions. With its ability to capture video in full HD resolution at 1080p, this model assures clarity and detail essential for risk management and security monitoring. The advanced low-light technology enables this camera to perform effectively with minimal illumination, ensuring that critical moments are captured regardless of lighting conditions.

On the other hand, the ES30PC utilizes a similar sensor but emphasizes a compact and lightweight design, making it ideal for discreet installations. This camera also supports full HD video resolution and incorporates advanced image processing techniques to enhance video clarity and reduce noise, providing crisp images in various environments.

Both models feature H.264 and H.265 video encoding, which allows for efficient bandwidth management. This technology optimizes storage space without compromising video quality, making these cameras a cost-effective solution for longer recording times. The integration of Power over Ethernet (PoE) simplifies installation and reduces cable clutter by allowing both power and data to run over a single Ethernet cable.

In terms of connectivity, the Pelco ES31PC and ES30PC support multiple streaming capabilities, ensuring that users can access live feeds remotely via various devices. The built-in web interface provides easy configuration and management options, allowing users to customize settings according to their specific needs.

Additional features include motion detection, which triggers alerts and recording as soon as activity is detected, and a robust weather-resistant housing that allows for outdoor deployment in challenging environments. This combination of durability and high performance ensures that the ES31PC and ES30PC are suitable for a wide range of applications, from retail and commercial spaces to critical infrastructure.

In summary, the Pelco ES31PC and ES30PC surveillance cameras stand out for their superior technology, comprehensive features, and adaptability. These models provide exceptional image quality, efficient video encoding, and user-friendly management, making them reliable options for contemporary surveillance needs.