Pelco EH8106L Legacy manual Important Safety Instructions, Risk of Electric Shock Do not Open

Page 3

Important Safety Instructions

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should be done only by qualified service personnel and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

5.The installation method and materials should be capable of supporting four times the weight of the enclosure, pan and tilt, camera and lens combination.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

C1420M-I (6/09)

3

Image 3
Contents EH8106L Legacy Pressurized Enclosure Contents Risk of Electric Shock Do not Open Important Safety InstructionsParts List AccessoriesDescription Camera and Lens InstallationWiring Diagram Power Connection Pressurizing the EnclosureMounting Disassembly Recharging and ReassemblyServicing Electrical SpecificationsEnvironmental Product Warranty and Return Information