Pelco EH8106L Legacy manual Specifications, Electrical

Page 9

Specifications

ELECTRICAL

Input Voltage

120 VAC (230 VAC optional) for heaters

Power Requirements

80 W

Connector

16-pin jam nut receptacle

Maximum Cable Distances

 

120 VAC

 

16 AWG (1.5 mm2)

2,238 ft (682 m)

18 AWG (1.0 mm2)

1,410 ft (430 m)

20 AWG (0.5 mm2)

1,040 ft (316 m)

230 VAC

 

16 AWG (1.5 mm2)

8,224 ft (2,507 m)

18 AWG (1.0 mm2)

5,182 ft (1,579 m)

20 AWG (0.5 mm2)

3,257 ft (993 m)

Heater

2 at 40 W, 120 VAC

NOTE: Heaters are thermostatically controlled to turn on at 40°F (4°C) and turn off at 60°F (16°C)

GENERAL

Construction

Aluminum 6061 T6

Finish

 

Outside

Gray polyester powder coat

Inside

Black anodized

Front Window

6-inch diameter tempered glass, 0.225-inch thick

Camera Mounting

Multiple mounting holes on camera sled allow for linear adjustment

Maximum Camera/Lens Size

5.0" D x 18.0" L (13 x 46 cm) or

 

18.0" L x 4.0" W x 4.0" H (46 x 10 x 10 cm)

Enclosure Mounting

RediLINK 26-pin connector mates enclosure to pan/tilt

Purge Fitting

Standard Schrader valve to allow enclosure to be filled with dry nitrogen

Purge Relief Fitting

Prevents overpressurization of enclosure

Weight

17.2 lb (7.8 kg)

Ratings

Meets NEMA Type 6 and IP 67 standards

C1420M-I (6/09)

9

Image 9
Contents EH8106L Legacy Pressurized Enclosure Contents Risk of Electric Shock Do not Open Important Safety InstructionsParts List AccessoriesDescription Camera and Lens InstallationWiring Diagram Power Connection Pressurizing the EnclosureMounting Disassembly Recharging and ReassemblyServicing Electrical SpecificationsEnvironmental Product Warranty and Return Information