Selecting Transmission mode setting

You can change the transmission speed to prioritize sound quality or connectivity.

•The default setting is “Sound Quality Priority MODE”. When the sound is interrupted, select “Connectivity Priority MODE”.

1Set either of the following modes.

∫Sound Quality Priority MODE:

While pressing and holding [ ], press and hold [VOL -] until the Bluetooth® indicator (blue) and the Boost Mode indicator (orange) blink once.

∫Connectivity Priority MODE:

While pressing and holding [BOOST], press and hold [VOL -] until the Bluetooth® indicator (blue) and the Boost Mode indicator (orange) blink once.

2Press [Í/I] to turn this unit off, and press [Í/I] again to turn on.

•The Bluetooth® connection is automatically established, and the Bluetooth® indicator (blue) lights up.

Disconnecting Bluetooth®

•Turn off this unit or the device.

•Stop / disable the Bluetooth® transmission of the device.

•(For NFC-compatible devices only)

Touch and hold your device to NFC touch area of this unit again.

Note

•This unit can only be connected to one device at a time.

•This unit can register up to 8 devices. If a 9th device is paired, the device that has not been used for the longest time will be replaced.

•Even when this unit is turned off, if this unit is connected to the PC that is powered on with an USB cable and this unit is selected on the device that is paired with this unit, power of this unit will be turned on and connected via Bluetooth® automatically.

•If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable.

•The One-Touch Connection may not work properly depending on the type of device being used.

10 VQT5A86