Listening to audio from a Bluetooth® device
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth® feature of the device and place the device near this unit.
If you intend to use an NFC (Near Field
Connecting via Bluetooth® menu
For each Bluetooth® device you want to connect to via Bluetooth®, perform pairing first.
∫Pairing with Bluetooth® device
1Press [Í/I] to turn this unit on.
•The Bluetooth® indicator (blue) blinks slowly.
•If this unit is being used for the first time (factory preset state):
The Bluetooth® indicator (blue) blinks fast. → The unit will enter pairing standby. → Skip to step 3.
2Press and hold [ 
] until the Bluetooth® indicator (blue) blinks fast.
•The unit will enter pairing standby.
3Select “SC-NT10” from the Bluetooth® device’s Bluetooth® menu.
•When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) on the unit lights up.
•If prompted for a passkey, input “0000”.
•If the Bluetooth® device need to operate the Bluetooth® pairing setting and the Bluetooth® connecting setting, operate both settings.
4Start playing back music, a movie, etc. on your Bluetooth® device.
•Adjust the volume using the [VOL
When the maximum or minimum volume is reached, you will be notified by a beep sound.
∫Listening to audio from a paired device
When this unit is turned on, the Bluetooth® indicator (blue) will blink slowly indicating that the unit is in connection standby mode. Please perform Steps 3 and 4.
•When the power is turned on, this unit is connected to the
8 VQT5A86