Using Boost Mode
It will make the sound played back on this unit easier to hear by boosting the level of specific frequency band.
Press [BOOST] of this unit to switch the effect on/off.
• The Boost Mode indicator (orange) lights up.
Note
•If sound is distorted during playback, switch off the “Boost Mode”.
•When saving the power consumption, set “Boost Mode” to “off”.
•Location of this unit may move due to vibration.
Using the AUX input
You can listen to the audio via AUX IN jack (> 5) when this unit is connected to the device with the audio cable (not supplied).
Note
•When using the AUX input, the Bluetooth® audio, NFC features, and [ 
] are not available.
(It will be possible to receive a call 
] when there is a call coming in on the device connected with Bluetooth®. > 12)
•The setting of the Bluetooth® is not changed even if inserting the audio cable (not supplied) from AUX IN jack.
•When using the AUX input, the volume may seem low depending on the connected device. In that case, check if the volume limit can be changed on the device. For details, refer to the manual of the device.
Auto Power Off
This unit automatically turns off if there is no audio input and no operation is performed for approximately 10 minutes.
Note
•This function will not operate when the AUX input is used while connected with the USB cable.
•This function may operate even when the music is being played back if the volume of the connected device is low.
•This function may not operate depending on the connected device.
VQT5A86 11