Receiving a call with Hands-Free

If receiving a call on the mobile phone connected to this unit with Bluetooth®, you can make a hands-free call through this unit.

Preparation

For connecting Bluetooth®, refer to “Connecting via Bluetooth® menu” (> 8) or “One-Touch Connection (Connecting by NFC)” (> 9).

∫Receiving a call

Press [ ] when this unit rings.

•When receiving the call, the Bluetooth® indicator (blue) on the unit blinks.

•Talk into the microphone (> 5) on this unit.

∫Ending the call

Press [ ].

Note

•Adjust the volume during a call with [VOL +] and [VOL -] on this unit.

•During a hands-free call, if you want to switch from this unit to the hands-free device, operate the hands-free device.

•If this unit receives a call while playing audio with Bluetooth®, it changes the audio to a ringtone automatically. In addition, during playback with the AUX IN jack, the audio of this unit automatically changes to a ringtone of the pairing device.

•If you touch other devices to the NFC touch area of this unit when receiving a call, Bluetooth® connection will not switch.

•To mute the ringtone of this unit, press [VOL -] until the volume reaches minimum.

•Some apps for the mobile phone may not be available for hands-free.

To return to the factory preset state

Perform the following when you want to delete pairing device information, etc.

1Press [Í/I] to turn the power on.

2Press and hold [Í/I] for 10 seconds until Bluetooth® indicator (blue) and Boost Mode indicator (orange) blink twice.

The pairing device information will be deleted by the reset, so it will be necessary to perform pairing again. Delete the pairing information for this unit from the Bluetooth® device, then perform the pairing operation again. (See “Pairing with Bluetooth® device”

>8)

12 VQT5A86