Pelco HS4514 manual Installation, Enclosure Mounting

Page 6

Installation

The following items are supplied:

1HS4514 Series enclosure

1#10 socket for tamper-resistant screws (1/4-inch drive tool is not provided)

1Three-pin plug with leads (included with -1/-2 models with heater)

21/4-20 Phillips screws (to mount enclosure)

1 Steel eyebolt

ENCLOSURE MOUNTING

1.Place the enclosure on a flat surface with the top facing up. Open the enclosure using the following procedure:

a.Remove the four tamper-resistant screws securing the enclosure cover using the #10 socket for tamper-resistant screws (provided) and your 1/4-inch drive tool. (Drive tool is not provided.)

b.Separate the top and bottom enclosure sections.

2.Remove the camera sled from the rail by loosening the two 10-32 Phillips screws and sliding the sled to the rear.

3.Install two wiring fittings in the bottom of the enclosure.

If the enclosure is installed outdoors, be sure that watertight fittings are installed. If conduit or other wiring fittings are used, be sure the fittings are sealed to prevent water from getting inside the enclosure.

WARNING: To maintain watertight standards, proper cabling must be used when wiring the enclosure. Use of flat cable or multiple cables will prevent the proper seal of connectors. Outdoor rated sheathing should cover multiple cables.

4.Reassemble the top and bottom enclosure sections and lift the enclosure into place for mounting.

Optional: The enclosure can easily be lifted with the optional steel eyebolt (eyebolt included). Install the steel eyebolt and lift the enclosure using the following procedure:

a.Remove the Phillips screw and washer from the captive nut located in the back of the enclosure. Set the Phillips screw aside.

b.Install the steel eyebolt in the captive nut. Firmly tighten but do not overtighten.

c.Attach a hoist line to the steel eyebolt. Be sure the hoist line and any lifting hardware are sufficiently strong enough to support the weight of the enclosure. Hoist the enclosure into place.

5.Locate the two threaded mounting holes on the bottom of the enclosure. Using two 1/4-20 screws that do not exceed 5/8-inch (1.59 cm) in length (not supplied with the enclosure), mount the enclosure to a fixed mount.

If you lifted the enclosure with the aid of the steel eyebolt, remove the eyebolt and reinstall the Phillips screw and washer.

6.After the enclosure is mounted, opening the enclosure is more convenient using the following procedure:

a.Remove the two tamper-resistant screws securing the front of the enclosure cover.

b.Loosen, but do not remove, the two tamper-resistant screws securing the rear of the enclosure cover.

c.Push the top of the enclosure back approximately 1/4-inch (0.63 cm) and flip the top open.

d.Reverse the procedure to close.

6

C1472M-E (1/07)

Image 6
Contents HS4514 Series High Security Enclosure Page Contents List of FiguresList of Tables Important Safety Instructions Risk of Electric Shock Do not OpenDescription ModelsInstallation Enclosure MountingEnclosure Power Wire GaugeHeater Camera Mounting PelcoWiring Camera and Lens Wiring Camera to PowerFinal Installation Troubleshooting MaintenanceSpecifications MechanicalPage Product Warranty and Return Information ISO9001
Related manuals
Manual 4 pages 56.86 Kb

HS4514 specifications

The Pelco HS4514 is a dynamic and advanced outdoor high-speed dome camera designed to cater to the diverse needs of surveillance applications. This camera stands out due to its robust construction and innovative technologies, making it an ideal choice for security in various environments, including retail spaces, parking lots, and public areas.

One of the main features of the HS4514 is its exceptional image quality. Equipped with a high-resolution sensor, the camera delivers clear, detailed images even in low-light conditions, thanks to its advanced low-light performance technologies. This ensures that critical details can be captured around the clock, providing enhanced security and surveillance.

In addition to its high-resolution capabilities, the HS4514 incorporates powerful zoom functionality. With a motorized optical zoom lens, users can easily focus on faraway subjects without sacrificing image quality. The camera supports an impressive zoom ratio that allows for comprehensive monitoring, enabling security personnel to identify faces, license plates, and other important details from considerable distances.

The HS4514 also features Smart Tracking technology, which significantly improves its surveillance capabilities. This intelligent functionality allows the camera to automatically track moving objects within its field of view, ensuring that no activity goes unnoticed. This is particularly useful in scenarios where a manual operator may not be able to monitor every movement effectively.

Built for outdoor use, the HS4514 is constructed with weather and vandal-resistant materials, conforming to IP66 standards. This ensures reliable operation in a wide range of environmental conditions, protecting the camera from dust, rain, and potential impact.

Moreover, the camera is equipped with advanced analytics features, including motion detection and virtual tripwires. These tools allow security teams to receive alerts on suspicious activities, enabling timely responses to potential threats.

With an easy-to-use interface and compatibility with various Pelco video management systems, the HS4514 offers seamless integration into existing security setups. This adaptability, combined with its robust features, makes the Pelco HS4514 a critical asset for effective surveillance and security management. Its blend of innovation, durability, and exceptional performance solidifies its place as a market leader in high-speed dome cameras.