Pelco C3407M-D manual Cover and Back Box Installation, Unshielded Twisted Pair UTP Video

Page 7

Cover and Back Box Installation

The ICS150-CW Series Camclosure integrated camera system mounts only into a wall or ceiling.

UNSHIELDED TWISTED PAIR (UTP) VIDEO

The ICS150-CW Series offers support for unshielded twisted pair (UTP). The UTP video output signal is 1 Vp-p differential into a 100-ohm load. The unit uses active UTP.

At a minimum, UTP requires Cat5, 100-ohm twisted pair cable. The maximum UTP wiring distance is 3,000 ft (914 m).

FIXED CEILING/WALL

NOTE: You should install the camera module into the back box before installing the back box into the surface. When installing the back box into the surface, rotate the camera module to access the mounting holes. Refer to Camera Module on page 10 for more information.

1.Cut a hole 3.5 inches (9 cm) in diameter in the ceiling/wall. Use the supplied adapter plate as a template.

2.Pull video and power wires through the ceiling/wall.

3.Connect the video cable/wires:

BNC: Connect the BNC connector from the unit to a mating BNC connector.

Twisted Pair (UTP): Blue wire = Video +

Gray wire = Video -

4. Connect the power wires.

Voltage

Red Wire

Black Wire

12 VDC

+

Ground

24 VAC

~

~

AC operation only: If you are wiring more than one Camclosure integrated camera system to the same transformer, connect one side of the transformer to the red wire on all units, and connect the other side of the transformer to the black wire on all units. Failure to connect all of the units the same way will cause the cameras to be out of phase with each other and may produce a vertical roll when switching between cameras.

5. For a non-concrete ceiling/wall, use 6-32 toggle bolts to attach the surface mount ring and back box to the mounting surface. For a concrete ceiling/wall, use 8-32 mounting hardware. Mounting hardware is not supplied.

MOUNTING

HARDWARE (NOT SUPPLIED)

WALL OR CEILING

BACK BOX

Figure 2. Ceiling/Wall Installation

C3407M-D (1/07)

7

Image 7
Contents ICS150-CW Series Camclosure Page Contents Radio and Television Interference Regulatory NoticesModels DescriptionQty Description Shown Actual Size Unshielded Twisted Pair UTP Video Cover and Back Box InstallationTwisted Pair UTP Blue wire = Video + Voltage Red WireSuspended Ceiling 4S Deep Electrical BOX Deep Electrical Box InstallationModule Removal Camera ModuleBack Box Connectors Camera Orientation Module InstallationVarifocal Lens Zoom and Focus Adjustments Camera AdjustmentsSwitch Settings Adjusting the Vertical Phase Vertical Phase Adjustment 24 VAC Operation onlyPositioning the Camera Camera PositioningAdjustment Groove Dome Liner Loosen Screws Install Dome and Trim RingService Connector Service ConnectorCenter Conductor Coaxial Cable Braid Shield Camera SpecificationsGeneral ElectricalC3407M-D 1/07 Product Warranty and Return Information ISO9001

C3407M-D specifications

The Pelco C3407M-D is a cutting-edge video surveillance camera designed to meet the increasingly sophisticated demands of modern security systems. Known for its reliability and high-quality performance, the C3407M-D features an array of technology and characteristics that make it a preferred choice among security professionals.

One of the standout features of the C3407M-D is its high-resolution imaging capability. With a 4MP sensor, it captures crisp and detailed images, ensuring that critical moments are recorded with clarity. The camera is equipped with a wide dynamic range (WDR) technology that allows it to perform exceptionally well in challenging lighting conditions, such as when transitioning from bright to dark areas. This capability ensures that both highlights and shadows are well represented in every frame.

The C3407M-D offers a variety of lens options, allowing versatility depending on the specific surveillance needs. It can accommodate different focal lengths, from wide-angle for broad coverage to telephoto for more focused monitoring. This flexibility enables users to adapt the camera for various environments, whether it be a sprawling outdoor area or a confined indoor space.

Their advanced video processing algorithms further enhance the camera's performance. Features such as motion detection and tamper detection provide additional layers of security, alerting users in real-time when suspicious activities are detected. Moreover, the C3407M-D supports H.265 video compression, which ensures efficient storage and bandwidth utilization without compromising image quality.

Built for durability, the Pelco C3407M-D adheres to IP66 standards for ingress protection, making it suitable for outdoor applications even in harsh weather conditions. Its rugged design is resistant to dust and moisture, ensuring reliable operation whether installed in a cityscape, industrial environment, or remote area.

The camera integrates seamlessly with Pelco’s video management systems, allowing for easy setup, monitoring, and control. Its network capabilities ensure remote access and management, providing flexibility for users who need to monitor their environments from anywhere at any time.

In summary, the Pelco C3407M-D is a robust, high-performance surveillance camera that leverages advanced imaging technology and user-friendly features to enhance security measures across various settings. Its combination of high-resolution imaging, versatile lens options, and intelligent features makes it an excellent choice for maintaining safety and security.