Installation
Installation
4.After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure all impurities have been removed from the water line.
NOTE
•If you have to repair or disassemble the water line, cut off 6.35 mm of the plastic tubing to make sure you get a snug,
•Leaving the water line disconnected may cause the water valve to produce a buzzing sound over time.
•If water is not supplied to the refrigerator, make sure to turn the ice maker off.
Water filter (not provided)
The water filter and the water filter installation kit containing necessary parts illustrated in this section are not provided. You must purchase the water filter and the water filter installation kit at a local Samsung service center.
To connect to the water supply line
|
|
|
| 01 Cold water line |
|
| 01 |
| 02 Pipe clamp |
|
|
| 03 Plastic line | |
|
|
|
| |
07 |
| 02 | 03 | 04 Compression nut |
|
|
| 05 Compression sleeve | |
|
|
|
| |
|
|
|
| 06 Packing nut |
06 | 05 | 04 |
| 07 Shut off valve |
| 08 Filter cartridge | |||
|
|
|
|
| 09 Cartridge holder |
09 | 10 Cut vertically by 90 degrees |
|
08
10
1.Shut off the main water line and turn the ice maker off.
2.Locate the nearest cold potable water line.
3.Follow the instructions mentioned in the water filter installation kit.
4.After connecting the water line to the inlet of the cartridge holder with the plastic line fully inserted, insert and tighten the filter cartridge.
5.Turn on the water line and flush 11 liters of water (approximately 6 minutes) through the filter before use.
30 English
