To connect the water line to the refrigerator
WARNING
Make sure to connect the water line only to a potable water source.
There are several items you must purchase to complete this connection. You may find these items sold as a kit at your local hardware store.
| • 6.35 mm copper tubing | ||
Copper Tubing | • | 6.35 mm compression nut (1 pc) | |
| • | Ferrule (2 pc) | |
|
| ||
Plastic Tubing | • 6.35 mm plastic tubing Molded end (Bulb) | ||
• 6.35 mm compression nut (1 pc) | |||
| |||
|
|
| |
01
A
04
05
A.Refrigerator
B.Household water supply line
01 Compression nut (6.35 mm) (Not supplied)
02 Ferrule (Not supplied)
03 Copper tubing (Not supplied)
04 Plastic tubing (Assembled)
05 Compression fitting (Not supplied)
06 Molded end (Bulb)
Installation
02
06
07
0308
B
07 Compression nut (B) (6.35 mm) (Not supplied)
08 Plastic tubing (A) (Not supplied)
1.Connect the household water line to the assembled compression fitting.
-If you are using copper tubing, slip the compression nut (B) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown.
-If you are using plastic tubing (A), insert the molded end (Bulb) of the plastic tubing
(A) into the compression fitting.
CAUTION
If you use plastic tubing, (A) do not use it without the molded end (Bulb).
2.Tighten the compression nut (B) onto the compression fitting. Do not
3. Turn the water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the main water supply. Check the connections and, if necessary, tighten.
English 29
