A
CAUTION
5.Tighten the provided screws (x2) to attach the ice maker firmly to the refrigerator.
-Make sure the screw holes are aligned with each other before tightening the screws.
6.Put the ice bucket on the shelf as shown. By design, the ice bucket is supposed to sit behind the ice maker. Otherwise, the ice cubes from the ice maker will not collect in the bucket as intended.
7.When installation is complete, turn the refrigerator on, and then press Test Switch (A) on the ice maker to check if the ice maker operates and supplies water for the ice tray normally.
Installation
•If you don’t intend to use the ice maker, or if you are going for a business trip or vacation, turn off the ice maker.
•Do not turn the ice maker on without the ice bucket in place. The produced ice cubes drop into and scatter all over the freezer.
•A noise may occur when the ice maker is making ice or being supplied with water, or the ice cubes drop into the ice bucket. However, this is not a system failure, and when the ice bucket is full, none of these noises will occur.
•The first time you use the ice maker, or after you have replaced the water filter, the ice made by the ice maker may have a carbon residue. If this happens, discard the first full load of ice. Note that the carbon residue is harmless to humans.
English 35
